Hi, On Sun 29 Apr 2007, Magnus Larsson wrote: > Hi! > > I have a new Freecom DVB USB-stick, that i cannot get to work in Linux > (running ubuntu feisty). It works well in Windows, so the stick seem ok. > > I have read the http://www.linuxtv.org/wiki/index.php/DVB_USB and loaded > the modules and downloaded firmware accordingly. In my > /lib/firmware/2.6.20-15-generic I have: > dvb-fe-or51132-qam.fw > dvb-fe-or51132-vsb.fw > dvb-fe-or51211.fw > dvb-ttpci-01.fw > dvb-usb-avertv-a800-02.fw > dvb-usb-dibusb-5.0.0.11.fw > dvb-usb-dibusb-6.0.0.8.fw > dvb-usb-dtt200u-01.fw > dvb-usb-umt-010-02.fw > dvb-usb-vp702x-01.fw > dvb-usb-vp7045-01.fw > dvb-usb-wt220u-01.fw > dvb-usb-wt220u-fc03.fw > dvb-usb-wt220u-zl0353-01.fw > > When I have loaded the modules dvb_usb and dvb-usb-dtt200u (according to > the howto at linuxtv), I have the following modules : > > $ lsmod | grep dvb > dvb_usb_dtt200u 13444 0 > dvb_usb 24972 1 dvb_usb_dtt200u > dvb_core 81832 1 dvb_usb > dvb_pll 15492 1 dvb_usb > i2c_core 22784 3 dvb_usb,dvb_pll,i2c_ec > usbcore 134280 6 > dvb_usb_dtt200u,dvb_usb,hci_usb,ehci_hcd,uhci_hcd > > Plugging in the device gives in dmesg: > > [ 6013.972000] usb 4-3: new high speed USB device using ehci_hcd and > address 6 > [ 6014.496000] usb 4-3: configuration #1 chosen from 1 choice > > And no /dev/dvb-folder. > > I guess the firmware or modules are wrong - or is there any other > problem? Anybody have any assistance, or know if there is new versions > of modules to try? I also tried compiling the latest (as of April 29th) > code from http://linuxtv.org/hg/v4l-dvb. No change. > > All help or advice warmly welcome. > > Magnus Larsson > > > Output from lsusb -v (for the relevant device): > Bus 004 Device 003: ID 14aa:0620 AVerMedia (again) or C&E > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x14aa AVerMedia (again) or C&E > idProduct 0x0620 > bcdDevice 0.01 > iManufacturer 16 Hybrid TV Receiver (TM6000) > iProduct 32 Hybrid TV Receiver (TM6000) This device will be for the tm6000 driver: http://www.linuxtv.org/v4lwiki/index.php/TM6000 But I'm not working on it at the moment, mainly because the issue with getting decent support for hybrid tuners still hasn't been solved (as far as I know)! Michel _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
