Compro VideoMate T100 - saa7130HL + qt1010 + MT352

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello All,

I am interested in support for the Compro VideoMate T100 DVB-T PCI card.
The T200, T200A and T300 are already supported, so I hoping that T100
support is already in the works.  If it is not, I would like to offer my
services to get this device supported.  By way of introduction, I am a
Software Engineer of some 10 years experience.  I have worked on Linux
device drivers in the past, but that was some 9 years ago!  I feel I have
the skills to contribute something useful to this group; I may just need
some guidance to get started.  Spare time is scarce at the moment, so my
contributions may also be slow coming.

The chips of interest on the card that I can see are saa7130HL, qt1010 and
MT352.  All of which seem well supported in the latest kernel, so this
should be straight forward enough...  The card is auto-detected as the
Compro VideoMate T200 by the saa7134 driver in the 2.6.21-rc7 kernel, so I
expect that it uses the same vendor/device IDs in the same way that the
T200A does.  Although not tested, the analog video capture port and even the
IR remote control port are found by the current unmodified driver.

Any advice or guidance appreciated!


Cheers,

Dan



_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux