I notice some errors reported when the dib0700 is loaded. Are these OK to ignore? [ 50.462203] usbcore: registered new interface driver usbfs [ 50.487401] usbcore: registered new interface driver hub [ 50.511893] usbcore: registered new device driver usb [ 50.545315] USB Universal Host Controller Interface driver v3.0 [ 50.571719] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 50.594023] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 50.594027] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 50.618885] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 50.641136] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000bc00 [ 50.665040] usb usb1: configuration #1 chosen from 1 choice [ 50.682311] hub 1-0:1.0: USB hub found [ 50.693596] hub 1-0:1.0: 2 ports detected [ 51.177088] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 [ 51.200871] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 51.200875] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 51.217587] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 51.239838] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000b000 [ 51.258756] usb usb2: configuration #1 chosen from 1 choice [ 51.275858] hub 2-0:1.0: USB hub found [ 51.287139] hub 2-0:1.0: 2 ports detected [ 51.478663] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16 [ 51.500984] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 51.500988] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 51.550551] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 51.572786] uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000b400 [ 51.809459] usb usb3: configuration #1 chosen from 1 choice [ 51.826689] hub 3-0:1.0: USB hub found [ 51.837976] hub 3-0:1.0: 2 ports detected [ 52.529415] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 17 [ 52.551707] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 52.551710] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 52.575997] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 52.598240] uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000b800 [ 52.627186] usb usb4: configuration #1 chosen from 1 choice [ 52.644443] hub 4-0:1.0: USB hub found [ 52.655740] hub 4-0:1.0: 2 ports detected [ 53.845670] ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 18 (level, low) -> IRQ 16 [ 53.867984] uhci_hcd 0000:03:04.0: UHCI Host Controller [ 53.892254] uhci_hcd 0000:03:04.0: new USB bus registered, assigned bus number 5 [ 53.914494] uhci_hcd 0000:03:04.0: irq 16, io base 0x00008c00 [ 53.943338] usb usb5: configuration #1 chosen from 1 choice [ 53.960594] hub 5-0:1.0: USB hub found [ 53.971895] hub 5-0:1.0: 2 ports detected [ 54.770872] ACPI: PCI Interrupt 0000:03:04.1[B] -> GSI 21 (level, low) -> IRQ 19 [ 54.793191] uhci_hcd 0000:03:04.1: UHCI Host Controller [ 54.811570] uhci_hcd 0000:03:04.1: new USB bus registered, assigned bus number 6 [ 54.833834] uhci_hcd 0000:03:04.1: irq 19, io base 0x00009000 [ 54.853568] usb usb6: configuration #1 chosen from 1 choice [ 54.871547] hub 6-0:1.0: USB hub found [ 54.882837] hub 6-0:1.0: 2 ports detected [ 55.086936] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 55.262410] usb 5-1: configuration #1 chosen from 1 choice [ 61.956776] dib0700: loaded with support for 2 different device-types [ 61.993148] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. ############ errors start [ 62.014577] **WARNING** I2C adapter driver [Hauppauge Nova-T 500 Dual DVB-T] forgot to specify physical device; fix it! [ 62.047514] dvb-usb: This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter) [ 62.084629] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T error while loading driver (-19) ############ errors end [ 62.108150] usbcore: registered new interface driver dvb_usb_dib0700 [ 64.697710] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20 [ 64.720027] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 64.720031] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 64.744451] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 64.766704] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 64.766714] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xde100000 [ 64.787573] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 64.821581] usb usb7: configuration #1 chosen from 1 choice [ 64.838829] hub 7-0:1.0: USB hub found [ 64.850136] hub 7-0:1.0: 8 ports detected [ 65.362275] ACPI: PCI Interrupt 0000:03:04.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 65.384578] ehci_hcd 0000:03:04.2: EHCI Host Controller [ 65.408886] ehci_hcd 0000:03:04.2: new USB bus registered, assigned bus number 8 [ 65.431146] ehci_hcd 0000:03:04.2: irq 21, io mem 0xdd025000 [ 65.448131] ehci_hcd 0000:03:04.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 65.482075] usb usb8: configuration #1 chosen from 1 choice [ 65.499330] hub 8-0:1.0: USB hub found [ 65.510636] hub 8-0:1.0: 4 ports detected [ 65.540000] usb 5-1: USB disconnect, address 2 [ 66.008950] usb 8-1: new high speed USB device using ehci_hcd and address 2 [ 66.145224] usb 8-1: configuration #1 chosen from 1 choice [ 66.161913] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 66.183326] **WARNING** I2C adapter driver [Hauppauge Nova-T 500 Dual DVB-T] forgot to specify physical device; fix it! [ 66.216239] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 66.241510] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T). [ 66.326605] **WARNING** I2C adapter driver [DiBX000 tuner I2C bus] forgot to specify physical device; fix it! [ 66.357545] DVB: registering frontend 0 (DiBcom 3000MC/P)... [ 66.397349] MT2060: successfully identified (IF1 = 1220) [ 66.838135] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 66.863566] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T). [ 66.886794] **WARNING** I2C adapter driver [DiBX000 tuner I2C bus] forgot to specify physical device; fix it! [ 66.917742] DVB: registering frontend 1 (DiBcom 3000MC/P)... [ 66.936827] MT2060: successfully identified (IF1 = 1220) [ 67.380734] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. -- Eyal Lebedinsky (eyal@xxxxxxxxxxxxxx) <http://samba.org/eyal/> attach .zip as .dat _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
