On 4/5/07, Birgit Scholueke <bidoma@xxxxxxxxxxxxx> wrote:
Hello , this ist my first email here in the list. So i have the following problem. The USB CVB-T Stick has these Chips DiBCom 700 and 7700 mt2060 I`ve searches for the Driver and i found out that they are supported anyway it was said. the modules for it are dib0700 which should include the 7700 chip and the mt2060 module. But i had a problem when i tryed out my stick: dmesg [ 5050.256000] usb 5-3: new high speed USB device using ehci_hcd and address 7 [ 5050.388000] usb 5-3: configuration #1 chosen from 1 choice [ 5050.388000] em28xx new video device (0ccd:005a): interface 0, class 255 [ 5050.388000] em28xx probing error: endpoint is non-ISO endpoint!
regarding this one, there are em28xx devices out there which use the same USB product ID. There's a small check in the usb probe function which at least checks for isochronous endpoints, if it fails it will not attach because it would be the wrong driver for it.
and usbview said that it talks only `bulk`. Maybe some of you can help me, because i know that a few users thinking about it to buy these stick although they have linux. My motherlangugage is german so if something is not understandable you can ask me in german.
cheers, Markus _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
