I pulled the card and found the following chips:
SAA7135HL/203 (CG2548 13 TSG06302)
COMPRO PRO1A 0643D
WJCE6353 (W620AA17) (Codfam decoder?)
ATMEL642 (EEPROM?)
Plus 2 ICs which have been defaced.
One is a SO-14 package and looks like it might have a Philips logo on
it It might be a 74HC74N. The 74 can be read. The letters are a bit
harder to make out. I don't know why they would need to deface that.
One is a SO-8 package and although you can see writing, it can't be read.
There are also 2 metal enclosures. Much smaller than any I have seen
before. They are both 36mm x 26mm x 5mm. I have not tried opening them.
I forgot that the card also has a wake up clock. You can connect it to
the atx power switch and it can wake up the machine at a specified time.
(Might also support PCI wake up).
Other interesting things (all might be crystals):
4.0F6L
32.1F6L
S6X3
NSK 6JLA Z 20.4800
John.
John Newbigin wrote:
I have recently been given a Compro VideoMate T750 to get working with
Linux. Unfortunately it is not yet supported by the v4l-dvb drivers.
This is an Australian card has the following features:
- Analog TV Tuner (PAL-BG?)
- Analog TV Capture (SVideo & Composite)
- FM Radio
- IR
- DVB-T * 2
I have tested a few similar cards using the Mercurial drivers and the
analog capture works. I have not been able to get the DVB working
(which is what I want the most).
I am prepared to do whatever testing is required to get this working
but I was hoping there was a saa7134 expert who could suggest the best
way to go about it.
The card is currently installed in my linux dev box but I can pull it
and/or stick it in a windows box if necessary.
I have used btspy under windows in the past to figure out bt878 based
cards. Is there a similar saaspy?
T750 Card details:
02:02.0 Class 0480: 1131:7133 (rev d1)
Subsystem: 185b:c900
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (21000ns min, 8000ns max)
Interrupt: pin A routed to IRQ 217
Region 0: Memory at f6004000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
saa7133[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2
b2 92
saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff
ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 03 01 08 ff 00 89 ff ff
ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff
saa7133[0]: i2c eeprom 40: ff d7 00 c4 86 1e 05 ff 02 c2 ff 01 ff ff
ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff cb
saa7133[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff
Loading the wrong card type (70) results in:
saa7133[0]: board init: gpio is 84bf00
input: saa7134 IR (Compro Videomate DV as /class/input/input8
tuner 1-0062: chip found @ 0xc4 (saa7133[0])
tuner 1-0063: chip found @ 0xc6 (saa7133[0])
tuner 1-0068: chip found @ 0xd0 (saa7133[0])
see also
http://lists-archives.org/video4linux/16606-driver-for-compro-videomate-t750-saa7135-card.html
Any help would be much appreciated.
John.
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
