Terratec Cinergy 1200 and 170MHz frequency

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

I have bought new Terratec Cinergy 1200 DVB-C PCI card. After successfully patched the driver (new chip on this card wasn't supported yet) everything seemed working fine. But when I tried to tune channels, I noticed that it can't find any channels from 170MHz band (SR=6875k, QAM128). This is rather unfortunate because all main channels are in this frequency. I tried this card also in XP. Terratec's own program is rather poor, but it seemed to find these channels. Problems finding channels has been occured in Kaffeine and dvbscan (havn't tried any other in linux).

So...has anyone met this problems earlier. I found a discussion(http://www.dvdplaza.fi/forums/archive/index.php/t-30704.html --> 25.4.2005, 21:03) where some have had same problem, but it has been 2005 and driver has been changed a little since.

I'm using :

SUSE 10.2 (2.6.18.2-34).
AMD Sempron 64 3400+
ASUS M2NPV-VM

Olli K.

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux