Re: Problems after buil the source code from http://linuxtv.org/hg/v4l-dvb.

[Francisco Demeter <fdemeter@xxxxxx>]

Trent Piepho wrote:

On Sun, 18 Mar 2007, Francisco Demeter wrote:
  

how to patch the source code, now the IR control is working, but my
webcam stops to work.

I try to rebuild the webcam driver gspcav, but i get still the same
error by load them:

root@todobarato:/usr/src/gspca-source/modules/gspca# dmesg | grep gspca
gspca: disagrees about version of symbol video_devdata
gspca: Unknown symbol video_devdata
    

The gspca driver is getting built against the media drivers in your kernel
source, but the media drivers you are using are the newer ones from the
v4l-dvb Hg you installed.

What you might be able to do, is to use
make kernel-links

>from v4l-dvb to copy v4l-dvb into your kernel source.  This will modify the
kernel source you have installed, so you probably should back it up first!
Now you can try to rebuild gspca against this new source.

  

Ok , but I am not understanding what exactly i need to copy where?
I think it will be complicated for me, if i don't now, what data should I replace.
I don't have so much  experience with kernel hacking.

Another solution more ease for me, can be if is a way to configure two cards, I have installed all so one leadtek winfast 2000 XP. where the remount control is working. What I don't now, if is possible to set up 2  card at the same time, so that the IR work over the winfast 2000 XP.

So far I don't have any information how to do this, all ways I get recognized only one card and not the 2 cards.

I have a backup from my system, so that I can regenerate as was, with the web cam working.

Best regards, Francisco Demeter.

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb