> Ok, I've installed dvbstream but the frequency seems wrong. Here is one row > from channels.conf generated with dvbscan > > > SVT24:522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_ > INTERVAL_1_8:HIERARCHY_NONE:1249:1248:5180 > > So, I assume 522000000 is the frequency? But when I run: Correct. Mux 1 is on 522 MHz in Motala. > dvbstream -f 522000000 -o -tm 8 8192 > recordings/test.ts > > I got an empty file and this: > dvbstream v0.5 - (C) Dave Chapman 2001-2004 > Released under the GPL. > Latest version available from http://www.linuxstb.org/ > Using DVB card "Zarlink MT352 DVB-T" > tuning DVB-T (in United Kingdom) to -1986010112 Hz > polling.... > Getting frontend event > FE_STATUS: > polling.... > Getting frontend event > FE_STATUS: FE_HAS_SIGNAL > > The frequency seems wrong? Yes, it seems... Try using kHz anyway (522000). I'm using another version of dvbstream: pf@octopussy:~$ dvbstream -f 730000000 1018 1019 dvbstream v0.6 - (C) Dave Chapman 2001-2004 Released under the GPL. Latest version available from http://www.linuxstb.org/ Tuning to 730000000 Hz Using DVB card "DST DVB-T", freq=730000000 tuning DVB-T (in United Kingdom) to 730000000 Hz, Bandwidth: 8 Getting frontend status Event: Frequency: 730000000 Signal strength: 25088 SNR: 20480 FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC // Peter _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
