Kirjoitit viestissäsi (lähetysaika keskiviikko, 7. maaliskuuta 2007 00:18:49): > >I've been having the same kind of problems with Technotrend C-1500 and > > it's bundled remote (a grey one). I tried loading ir-common with > > repeat=0, but still it seems to take quite a long time before the > > keypress gets generated. It feels like I anyway have to invoke some kind > > of "repeat handling" to get the keypress through. > > I'm not quite sure I follow, you have the same kind of problem (i.e. > that a continous keypress generates repeat events)? But then you talk > about time before the keypress is generated? I'll try to explain better how the remote works for me. I'm not sure if the problem is really the same, but it sounded similar, so I decided to tell about it on this thread... At first, maybe for about ten keypresses after boot or reloading the drivers, the remote works perfectly. The event happens immediately after pressing the key. Then it goes into a mode where I have to press the key for a long time before anything happens. And when the event actually occurs, then it often also generates a repeat. I tried repeat=0 to stop this unwanted repeat from occurring, but it didn't work very well. I tried to get an evtest log of the situation: Event: time 1173221474.755429, type 1 (Key), code 103 (Up), value 1 Event: time 1173221474.755434, type 0 (Reset), code 0 (Reset), value 0 Event: time 1173221475.155711, type 1 (Key), code 103 (Up), value 2 Event: time 1173221475.155716, type 0 (Reset), code 0 (Reset), value 0 Event: time 1173221475.219704, type 1 (Key), code 103 (Up), value 0 Event: time 1173221475.219707, type 0 (Reset), code 0 (Reset), value 0 -- Ville-Pekka Vainio vpivaini@xxxxxxxxxxxxxx _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
