hi there been trying to get this piece of s*** card working on linux for
ages with no success. tried on various distros and at the moment running
ubuntu edgy so would like to make it working on it (also i am going to
test feisty alpha 5 once it finishes downloading just in case...)
my last attempt was following this guide for the nebula card (obviously using the an2235 firmare and answering m to all the dibcom questions) -
http://www.ubuntuforums.org/showthread.php?t=198423
dmesg outpout is this:
[17180051.868000] ohci_hcd 0000:06:00.0: wakeup
[17180052.252000] usb 4-1: new full speed USB device using ohci_hcd and address 2
[17180052.724000] ohci_hcd 0000:06:00.0: wakeup
[17180053.108000] usb 4-1: new full speed USB device using ohci_hcd and address 3
[17180053.312000] usb 4-1: configuration #1 chosen from 1 choice
[17180053.648000] usbtest 4-1:1.0: EZ-USB device
[17180053.648000] usbtest 4-1:1.0: full speed {control bulk-in bulk-out} tests (+alt)
[17180053.652000] usbcore: registered new driver usbtest
[17180053.892000] usbcore: registered new driver dvb_usb_dibusb_mb
lsusb output:
Bus 005 Device 001: ID 0000:0000 Bus 006 Device 001: ID 0000:0000 Bus 004 Device 003: ID 0547:2235 Anchor Chips, Inc. AN2235 EZUSB-FX Microcontroller
Bus 004 Device 001: ID 0000:0000 Bus 003 Device 003: ID 054c:0069 Sony Corp. Memorystick MSC-U03 Reader
Bus 003 Device 002: ID 054c:0096 Sony Corp.
Bus 003 Device 001: ID 0000:0000 Bus 002 Device 002: ID 046d:092b Logitech, Inc.
Bus 002 Device 001: ID 0000:0000 Bus 001 Device 002: ID 04b8:0005 Seiko Epson Corp. Stylus Printer
Bus 001 Device 001: ID 0000:0000
also i have seem to have lost my webcam which was working under /dev/video (0) after following those instructions...
please help if you know how to get this working
cheers
michel
my last attempt was following this guide for the nebula card (obviously using the an2235 firmare and answering m to all the dibcom questions) -
http://www.ubuntuforums.org/showthread.php?t=198423
dmesg outpout is this:
[17180051.868000] ohci_hcd 0000:06:00.0: wakeup
[17180052.252000] usb 4-1: new full speed USB device using ohci_hcd and address 2
[17180052.724000] ohci_hcd 0000:06:00.0: wakeup
[17180053.108000] usb 4-1: new full speed USB device using ohci_hcd and address 3
[17180053.312000] usb 4-1: configuration #1 chosen from 1 choice
[17180053.648000] usbtest 4-1:1.0: EZ-USB device
[17180053.648000] usbtest 4-1:1.0: full speed {control bulk-in bulk-out} tests (+alt)
[17180053.652000] usbcore: registered new driver usbtest
[17180053.892000] usbcore: registered new driver dvb_usb_dibusb_mb
lsusb output:
Bus 005 Device 001: ID 0000:0000 Bus 006 Device 001: ID 0000:0000 Bus 004 Device 003: ID 0547:2235 Anchor Chips, Inc. AN2235 EZUSB-FX Microcontroller
Bus 004 Device 001: ID 0000:0000 Bus 003 Device 003: ID 054c:0069 Sony Corp. Memorystick MSC-U03 Reader
Bus 003 Device 002: ID 054c:0096 Sony Corp.
Bus 003 Device 001: ID 0000:0000 Bus 002 Device 002: ID 046d:092b Logitech, Inc.
Bus 002 Device 001: ID 0000:0000 Bus 001 Device 002: ID 04b8:0005 Seiko Epson Corp. Stylus Printer
Bus 001 Device 001: ID 0000:0000
also i have seem to have lost my webcam which was working under /dev/video (0) after following those instructions...
please help if you know how to get this working
cheers
michel
What kind of emailer are you? Find out today - get a free analysis of your email personality. Take the quiz at the Yahoo! Mail Championship.
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
