Uwe Bugla wrote:
-------- Original-Nachricht --------
Datum: Wed, 28 Feb 2007 00:19:40 +0000
Von: Rob Beard <rob@xxxxxxxxxxxxx>
An: linux-dvb@xxxxxxxxxxx
CC:
Betreff: Pinnacle PCTV Sat Pro PCI DVB-S Card
Hi folks,
I was wondering if someone could possibly advise me with regards to a
Digital Satellite card which I am trying to get working.
The card is a Pinnacle PCTV Sat Pro PCI card. I am running Ubuntu Edgy
6.10 with a 2.6.17-11 kernel. Now it appears that a driver isn't loaded
at startup so I guessed that this kernel at least doesn't support the
card.
Now I'm not very good at coding, in fact I'm next to useless at it but I
wondered if there is anything I could do to help try and get this card
working?
I'm not sure if this helps but below is the output of lspci -v for the
card...
02:09.0 Multimedia controller: Pinnacle Systems Inc. Unknown device 0040
Subsystem: Pinnacle Systems Inc. Unknown device 0048
Flags: bus master, medium devsel, latency 32, IRQ 3
Memory at ea000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
02:09.2 Multimedia controller: Pinnacle Systems Inc. Unknown device 0042
Subsystem: Pinnacle Systems Inc. Unknown device 0048
Flags: bus master, medium devsel, latency 32, IRQ 3
Memory at ea001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
More details on the card can be found at:
http://www.pinnaclesys.com/PublicSite/uk/Products/Consumer+Products/PCTV+Tuners/PCTV+Digital+PVR+(DVB-S_DVB-T)/PCTV+Sat+Pro+PCI.htm
If anyone could help I would be really grateful.
Thanks in advance,
Rob
Hi Rob,
I fear that your card is an unsupported one.
I am running a Pinnacle PCTVSAT PCI, and my second one is a Pinnacle PCTVPRO, which is an analog card. Both are running fine.
Regards
Uwe
Thanks Uwe,
The card was actually bought by my dad for his PC which I am going to
install Ubuntu on. I figured I'd try it in my PC first to see if it was
detected. I think we'll return it and order a Hauppage card which
looking at the Wiki appears to be better supported (I believe the
Hauppage card is a Nova-S Plus PCI).
Thanks anyway for the quick response.
Regards,
Rob
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb