Hi
Attached is a patch for v4l-dvb , for the Opera DVB-S USB2.0 Adapter.
It should work for the dvb stuff 100% and for RC-Stuff nearly 100%(slow
response to keys some times)
3 firmware files are needed which can be found after a search with google (or
can i upload these files somwhere ?)
Signed-of-by: Marci Gittler <g.marco@xxxxxxxxxx>
Signed-of-by: Mario Hlawitschka <dh1pa@xxxxxxxxx>
diff -r 42b9d09cff15 linux/drivers/media/dvb/dvb-usb/Kconfig
--- a/linux/drivers/media/dvb/dvb-usb/Kconfig Fri Feb 23 10:34:37 2007 -0200
+++ b/linux/drivers/media/dvb/dvb-usb/Kconfig Sat Feb 24 14:04:44 2007 +0100
@@ -208,3 +208,12 @@ config DVB_USB_DTT200U
The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan).
The WT-220U and its clones are pen-sized.
+
+config DVB_USB_OPERA1
+ tristate "Opera1 DVB-S USB2.0 receiver."
+ depends on DVB_USB
+ select DVB_STV0299
+ help
+ Say Y here to support the Opera DVB-S USB2.0 receiver.
+
+
\ No newline at end of file
diff -r 42b9d09cff15 linux/drivers/media/dvb/dvb-usb/Makefile
--- a/linux/drivers/media/dvb/dvb-usb/Makefile Fri Feb 23 10:34:37 2007 -0200
+++ b/linux/drivers/media/dvb/dvb-usb/Makefile Sat Feb 24 14:03:40 2007 +0100
@@ -51,4 +51,9 @@ dvb-usb-dib0700-objs = dib0700_core.o di
dvb-usb-dib0700-objs = dib0700_core.o dib0700_devices.o
obj-$(CONFIG_DVB_USB_DIB0700) += dvb-usb-dib0700.o
+dvb-opera-usb-objs = opera1.o
+
+obj-$(CONFIG_DVB_USB_OPERA1) += dvb-opera-usb.o
+
+
EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff -r 42b9d09cff15 linux/drivers/media/dvb/dvb-usb/opera1.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/linux/drivers/media/dvb/dvb-usb/opera1.c Sat Feb 24 14:00:55 2007 +0100
@@ -0,0 +1,631 @@
+/* DVB USB framework compliant Linux driver for the Opera1 DVB-S Card
+*
+* Copyright (C) 2006 Mario Hlawitschka (dh1pa@xxxxxxxxx)
+* Copyright (C) 2006 Marco Gittler (g.marco@xxxxxxxxxx)
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the Free
+* Software Foundation, version 2.
+*
+* see Documentation/dvb/README.dvb-usb for more information
+*/
+#include "linux/module.h"
+#include "linux/init.h"
+#include "linux/firmware.h"
+#include "stv0299.h"
+
+#include "opera1.h"
+
+static u32 last_key_pressed=-1;
+
+static const char* xilinx_init="\x90\x6e\xc5\xfa\x32\xd0\x73\x23\x1e";
+static int opera1_xilinx_load_firmware(struct usb_device *dev, const char *filename);
+
+int dvb_usb_opera1_debug;
+module_param_named(debug,dvb_usb_opera1_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))." DVB_USB_DEBUG_STATUS);
+//struct mutex mymutex;
+
+int opera1_xilinx_rw(struct usb_device*dev, u8 request, u16 value, u8*data, u16 len,int flags){
+
+ int ret=0,t=0;
+ char r[10];
+ u8 u8buf[len];
+ unsigned int pipe=(flags==1)?usb_rcvctrlpipe(dev,0):usb_sndctrlpipe(dev,0);
+ u8 request_type=(flags==1)?USB_DIR_IN:USB_DIR_OUT;
+
+
+ //if (mutex_lock_interruptible(&mymutex)){
+ // return -EAGAIN;
+ //}
+
+
+ if (flags==0)
+ memcpy(u8buf,data,len);
+ ret=usb_control_msg(dev, pipe,request, request_type| USB_TYPE_VENDOR,value, 0x0 /*index*/, u8buf,len, 2000);
+ //msleep(20);
+ if (request==OPERA_TUNER_REQ){
+ t=usb_control_msg(dev, usb_rcvctrlpipe(dev,0),
+ OPERA_TUNER_REQ, USB_DIR_IN|USB_TYPE_VENDOR, 0x01,0x0/*index*/, r, 10, 2000);
+ }
+ if (flags==1)
+ memcpy(data,u8buf,len);
+ //mutex_unlock(&mymutex);
+ return ret;
+
+}
+int opera1_xilinx_read(struct usb_device*dev, u8 request, u16 value, u8*data, u16 len){
+ return opera1_xilinx_rw(dev,request,value,data,len,1);
+}
+int opera1_xilinx_send(struct usb_device*dev, u8 request, u16 value, u8*data, u16 len){
+ return opera1_xilinx_rw(dev,request,value,data,len,0);
+}
+
+/* I2C */
+
+static int opera1_usb_i2c_xfer(struct dvb_usb_device* dev,struct i2c_msg msg[],int num)
+{
+ int i;
+ u8 request;
+ u16 value;
+ //return 0;
+ if (dev==NULL){
+ info ("no usb_device");
+ return -EINVAL;
+ }
+ if (mutex_lock_interruptible(&dev->i2c_mutex) < 0)
+ return -EAGAIN;
+ for (i = 0; i < num; i++) {
+ //READ
+ request=(msg[i].addr&0xff00) >> 8;
+ if (!request)
+ request=0xb1;
+ value=(msg[i].addr&0xff);
+ if (msg[i].flags & I2C_M_RD){
+ value|=0x01;
+ }
+ if (request==0xa0)
+ value=0xe600;
+ if ((msg[i].flags & I2C_M_RD)) {
+ opera1_xilinx_read(dev->udev,request,value,msg[i].buf,msg[i].len);
+ }else{//WRITE
+ opera1_xilinx_send(dev->udev,request,value,msg[i].buf,msg[i].len);
+ }
+ }
+ mutex_unlock(&dev->i2c_mutex);
+ return i;
+}
+
+static int opera1_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ if (d)
+ return opera1_usb_i2c_xfer(d,msg,num);
+ return -EINVAL;
+}
+static u32 opera1_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm opera1_i2c_algo = {
+ .master_xfer = opera1_i2c_xfer,
+ .functionality = opera1_i2c_func,
+};
+
+
+static int opera1_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ int freq_add=0;
+ u8 tuner_buf[4];
+ struct dvb_usb_adapter* udev_adap=(struct dvb_usb_adapter*)(fe->dvb->priv);
+
+
+ struct i2c_msg tuner_msg = {.addr=0xc0, .flags=0, .buf=tuner_buf, .len=sizeof(tuner_buf) };
+ struct i2c_msg msg[]={
+ {.addr=0xb701,.flags=0,.buf="\x01",.len=1},
+ {.addr=0xb600,.flags=0,.buf="\x00",.len=1},
+ };
+
+ u8 filter=0;
+
+ // setup PLL filter
+ switch (params->u.ofdm.bandwidth) {
+ case BANDWIDTH_6_MHZ: filter = 0;break;
+ case BANDWIDTH_7_MHZ: filter = 0;break;
+ case BANDWIDTH_8_MHZ: filter = 1;break;
+ default: break; //INVAILD
+ }
+
+ freq_add=params->frequency/500;
+ tuner_buf[0]=(freq_add>>8) & 0xff;
+ tuner_buf[1]=freq_add & 0xff;
+ tuner_buf[2]=(filter==1) ? 0xed:0xe5;//symbolrate 0x500000 :0xed /0x400000 :exe5 ( e1/e5/ed)
+
+ if (freq_add/2<1100) tuner_buf[3]=0xe6;
+ if (freq_add/2>1100) tuner_buf[3]=0x24;
+ if (freq_add/2>1400) tuner_buf[3]=0x64;
+ if (freq_add/2>1666) tuner_buf[3]=0x84;
+ if (freq_add/2>1800) tuner_buf[3]=0xa4;
+ if (freq_add/2>1900) tuner_buf[3]=0xc4;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1);
+ i2c_transfer(&udev_adap->dev->i2c_adap, &tuner_msg, 1);
+ msleep(1);
+ return 0;
+}
+static int opera1_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
+{
+ struct i2c_msg msg[]={
+ {.addr=0xb600,.flags=0,.buf="\x00",.len=1}, //13 V
+ };
+ struct dvb_usb_adapter* udev_adap=(struct dvb_usb_adapter*)(fe->dvb->priv);
+ if (voltage==SEC_VOLTAGE_18){
+ msg[0].addr=0xb601;
+ msg[0].buf="\x01";
+ }
+ i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1);
+ return 0;
+}
+
+static int opera1_stv0299_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio){
+
+ u8 aclk = 0x98;
+ u8 bclk = 0x95;
+
+ if (srate < 1500000) {
+ aclk = 0xb7;
+ bclk = 0x47;
+ } else if (srate < 3000000) {
+ aclk = 0xb7;
+ bclk = 0x4b;
+ } else if (srate < 7000000) {
+ aclk = 0xb7;
+ bclk = 0x4f;
+ } else if (srate < 14000000) {
+ aclk = 0xb7;
+ bclk = 0x53;
+ } else if (srate < 30000000) {
+ aclk = 0xb6;
+ bclk = 0x53;
+ } else if (srate < 45000000) {
+ aclk = 0xb4;
+ bclk = 0x51;
+ }
+//info ("set symbol rate");
+ stv0299_writereg(fe, 0x13, aclk);
+ stv0299_writereg(fe, 0x14, bclk);
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
+
+ return 0;
+
+}
+static u8 opera1_inittab[]={
+ 0x00 ,0xa1 ,
+ 0x01 ,0x15 ,
+ 0x02 ,0x00 ,
+ 0x03 ,0x00 ,
+ 0x04 ,0x7d ,
+ 0x05 ,0x05 ,
+ 0x06 ,0x02 ,
+ 0x07 ,0x00 ,
+ 0x0b, 0x00 ,
+ 0x0c ,0x01 ,
+ 0x0d ,0x81 ,
+ 0x0e ,0x44 ,
+ 0x0f ,0x19 ,
+ 0x10 ,0x3f ,
+ 0x11 ,0x84 ,
+ 0x12 ,0xda ,
+ 0x13 ,0x98 ,
+ 0x14 ,0x95 ,
+ 0x15 ,0xc9 ,
+ 0x16 ,0xeb ,
+ 0x17 ,0x00 ,
+ 0x18 ,0x19 ,
+ 0x19 ,0x8b ,
+ 0x1a ,0x00 ,
+ 0x1b ,0x82 ,
+ 0x1c,0x7f ,
+ 0x1d,0x00 ,
+ 0x1e,0x00 ,
+ 0x1f,0x06 ,
+ 0x20,0x50 ,
+ 0x21,0x10 ,
+ 0x22,0x00 ,
+ 0x23,0x00 ,
+ 0x24,0x37 ,
+ 0x25,0xbc ,
+ 0x26,0x00 ,
+ 0x27,0x00 ,
+ 0x28,0x00 ,
+ 0x29,0x1e ,
+ 0x2a,0x14 ,
+ 0x2b,0x1f ,
+ 0x2c,0x09 ,
+ 0x2d,0x0a ,
+ 0x2e,0x00 ,
+ 0x2f,0x00 ,
+ 0x30,0x00,
+ 0x31,0x1f ,
+ 0x32,0x19 ,
+ 0x33,0xfc ,
+ 0x34,0x13,
+ 0xff,0xff,
+};
+
+static struct stv0299_config opera1_stv0299_config={
+ .demod_address= 0xd0,
+ .min_delay_ms=100,
+ .mclk=88000000UL,
+ .invert=1,
+ .skip_reinit=0,
+ .lock_output=STV0229_LOCKOUTPUT_0,
+ .volt13_op0_op1=STV0299_VOLT13_OP0,
+ .inittab=opera1_inittab,
+ .set_symbol_rate=opera1_stv0299_set_symbol_rate,
+};
+static int opera1_frontend_attach(struct dvb_usb_adapter *d){
+
+ if ((d->fe=dvb_attach(stv0299_attach,&opera1_stv0299_config,&d->dev->i2c_adap))!=NULL){
+ d->fe->ops.tuner_ops.set_params=opera1_tuner_set_params;
+ d->fe->ops.set_voltage=opera1_set_voltage;
+ return 0;
+ }
+ info ("not attached stv0299");
+ return -EIO;
+}
+
+int opera1_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+ int ret=0;
+ struct i2c_msg power_on_mgs[]={
+ {.addr=0xb701,.buf="\x01",.len=1},
+ {.addr=0xb601,.buf="\x01",.len=1},//set VOLTAGE setzen
+ {.addr=0xb1a6,.buf="\xff\x03",.len=2},
+ };
+
+ if (onoff){
+ opera1_usb_i2c_xfer(d,power_on_mgs,3);
+ }
+
+ return ret;
+}
+static int opera1_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+
+ struct i2c_msg start_tuner[]={
+ {.addr=0xb1d0,.buf="\x0c\x01",.len=2},
+ {.addr=0xb1a6,.buf="\xff\x00",.len=2},
+ };
+
+ if (!onoff){
+ start_tuner[0].buf[1]=0x03;
+ }
+ i2c_transfer(&adap->dev->i2c_adap,start_tuner,2);
+ return 0;
+}
+static int opera1_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff)
+{
+
+ u8 b_pid[3];
+ struct i2c_msg msg[]={
+ {.addr=0xb1a6,.buf=b_pid,.len=3},
+ };
+ b_pid[0]=(2*index)+4;
+ b_pid[1]=onoff?(pid&0xff):(0x00);
+ b_pid[2]=onoff?((pid>>8)&0xff):(0x00);
+ i2c_transfer(&adap->dev->i2c_adap,msg,1);
+ return 0;
+}
+
+
+static struct dvb_usb_rc_key opera1_rc_keys[]={
+ {0x5f,0xa0,KEY_1},
+ {0x50,0xae,KEY_2},
+ {0x5d,0xa2,KEY_3},
+ {0x41,0xbe,KEY_4},
+
+ {0x0a,0xf4,KEY_5},
+ {0x42,0xbc,KEY_6},
+ {0x47,0xb8,KEY_7},
+ {0x49,0xb6,KEY_8},
+ {0x05,0xfa,KEY_9},
+ {0x45,0xba,KEY_0},
+
+ {0x09,0xf6,KEY_UP},//chanup
+ {0x1a,0xe4,KEY_DOWN},//chandown
+ {0x5c,0xa2,KEY_LEFT},//voldown
+ {0x5e,0xa0,KEY_RIGHT},//volup
+ {0x07,0xf8,KEY_SPACE},//tab
+ {0x1e,0xe0,KEY_ENTER},//play ok
+ {0x1b,0xe4,KEY_Z},//zoom
+ {0x59,0xa6,KEY_M},//mute
+ {0x5a,0xa4,KEY_F},//tv/f
+ {0x18,0xe6,KEY_R},//rec
+ {0x01,0xfe,KEY_S},//Stop
+ {0x02,0xfc,KEY_P},//pause
+ {0x03,0xfc,KEY_W},//<- ->
+ {0x06,0xf8,KEY_C},//capture
+ {0x46,0xb8,KEY_Q},//exit
+ {0x43,0xbc,KEY_O},//power7
+
+};
+
+static int opera1_rc_query(struct dvb_usb_device *dev, u32 *event, int *state)
+{
+ // u8* search="0000000100000000010101000101000";
+ /**
+ startmarker 0001000011101101 or 0001000111101100
+
+ */
+ u8 rcbuffer[32];
+ const u8 startmarker1[16]="\x0\x0\x0\x1\x0\x0\x0\x0\x1\x1\x1\x0\x1\x1\x0\x1";
+ const u8 startmarker2[16]="\x0\x0\x0\x1\x0\x0\x0\x1\x1\x1\x1\x0\x1\x1\x0\x0";
+ struct i2c_msg read_remote[]={
+ {.addr=0xb880,.buf=rcbuffer,.flags=I2C_M_RD,.len=32},
+ };
+ int i=0,b=0;
+ u32 send_key=0;
+ memset(rcbuffer,0,32);
+
+ if (i2c_transfer(&dev->i2c_adap,read_remote,1)==1){
+ if (memcmp(rcbuffer,"\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1",32)==0 && last_key_pressed!=-1){
+ *state=REMOTE_KEY_REPEAT;
+ *event=last_key_pressed;
+ return 0;
+ }
+ /*for (b=0;b<32;b++){
+ if (rcbuffer[b])
+ printk("1");
+ else
+ printk("0");
+ }
+ printk("\n");*/
+ for (b=0;b<32;b++){
+ if (b+16<32){
+ if (memcmp(rcbuffer+b,startmarker1,16)==0 || memcmp(rcbuffer+b,startmarker2,16)==0){
+ /*for (c=b+16;c<32;c++){
+ if (rcbuffer[c])
+ printk("1");
+ else
+ printk("0");
+
+ }
+ printk("\n");*/
+ break;
+ }
+ }
+ }
+
+ //if ((b+15+16)==31)//only vaild sequences
+
+ for (i=b+16;i<32 && i<b+15+16;i++)
+ {
+ if (rcbuffer[i] /*&& (i-b-2)!=6*/)
+ send_key|=1;
+ send_key =send_key << 1;
+ }
+ //printk("key code :%x\n",send_key);
+ if (send_key==0)
+ return 0;
+ printk("key code :%x\n",send_key);
+
+ for (i=0;i< ARRAY_SIZE(opera1_rc_keys);i++){
+ if (
+ send_key!=0x7efe &&
+ (send_key&0xff )==opera1_rc_keys[i].data &&
+ ((send_key&0xff00) >>8)==opera1_rc_keys[i].custom
+ )
+ {
+ *state = REMOTE_KEY_PRESSED;
+ *event=opera1_rc_keys[i].event;
+ last_key_pressed=opera1_rc_keys[i].event;
+ break;
+ }
+ last_key_pressed=-1;
+ }
+ }else
+ *state = REMOTE_NO_KEY_PRESSED;
+
+ return 0;
+}
+
+
+/* do not change the order of the ID table */
+static struct usb_device_id opera1_table [] = {
+/* 00 */ { USB_DEVICE(USB_VID_CYPRESS, USB_PID_OPERA1_COLD ) },
+ { USB_DEVICE(USB_VID_OPERA1_WARM, USB_PID_OPERA1_WARM ) },
+/* 01 *//*{ USB_DEVICE(USB_VID_CYPRESS, USB_PID_OPERA1_COLD2 ) },
+ { USB_DEVICE(USB_VID_OPERA1_WARM, USB_PID_OPERA1_WARM ) },*/
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE (usb, opera1_table);
+static int opera1_firmware_download(struct usb_device *udev, const struct firmware *fw)
+{
+
+ int ret = usb_cypress_load_firmware(udev,fw,CYPRESS_FX2);
+ const struct firmware *fw1=NULL;
+
+ if(ret==0)
+ {
+ if ((ret = request_firmware(&fw1, "opera1-2.fw", &udev->dev)) != 0) {
+ err("did not find the firmware file. (%s) "
+ "Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
+ "opera1-2.fw",ret);
+
+ }else{
+ ret = usb_cypress_load_firmware(udev,fw1,CYPRESS_FX2);
+ release_firmware(fw1);
+ if (ret!=0)
+ info("error loading firmware1 %d,%d",-EIO,ret);
+
+ }
+ }
+ return ret;
+
+}
+
+static int opera1_xilinx_load_firmware(struct usb_device *dev, const char *filename)
+{
+ const struct firmware *fw = NULL;
+ u8 *b,*p;
+ int ret = 0,i;
+ u8 dummydata[10],testval;
+ memcpy(dummydata, xilinx_init, 9);
+ info("start downloading fpga firmware");
+
+ opera1_xilinx_send(dev,0xb1,0xa0,dummydata,9);
+ opera1_xilinx_send(dev,0xb1,0xa0,dummydata,1);
+ opera1_xilinx_read(dev,0xb1,0xa1,dummydata,1);
+ opera1_xilinx_send(dev,0xbc,0xaa,"\x00",1);
+ opera1_xilinx_send(dev,0xbc,0x00,&testval,1);
+ opera1_xilinx_send(dev,0xbc,0x00,&testval,1);
+ opera1_xilinx_send(dev,0xbc,0x00,&testval,1);
+ opera1_xilinx_send(dev,0xbc,0x00,&testval,1);
+
+ if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) {
+ err("did not find the firmware file. (%s) "
+ "Please see linux/Documentation/dvb/ for more details on firmware-problems.",
+ filename);
+ return ret;
+ }else{
+ p = kmalloc(fw->size,GFP_KERNEL);
+ if (p != NULL) {
+ u8 reset;
+ memcpy(p,fw->data,fw->size);
+ for(i = 0; p[i] != 0 && i < fw->size; ) {
+ b = (u8 *) p+i;
+ if (
+ opera1_xilinx_send(dev,OPERA_WRITE_FX2,0x0, b+1, b[0]) != b[0]
+ ) {
+ err("error while transferring firmware");
+ ret = -EINVAL;
+ break;
+ }
+ i = i+ 1 + b[0];
+ }
+ /* restart the CPU */
+ reset = 0;
+ if (ret || (opera1_xilinx_send(dev,0xa0,0xe600,&reset,1)!=1)) {
+ err("could not restart the USB controller CPU.");
+ ret = -EINVAL;
+ }
+ kfree(p);
+ }
+ }
+ if (fw){
+ release_firmware(fw);
+ }
+ info("done downloading fpga firmware");
+ return ret;
+}
+
+static struct dvb_usb_device_properties opera1_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .firmware = "opera1.fw",
+ .download_firmware = opera1_firmware_download,
+ .size_of_priv = 0,
+
+ .power_ctrl = opera1_power_ctrl,
+ .i2c_algo = &opera1_i2c_algo,
+
+ .rc_key_map = opera1_rc_keys,
+ .rc_key_map_size= ARRAY_SIZE(opera1_rc_keys),
+ .rc_interval = 200,
+ .rc_query=opera1_rc_query,
+
+ .generic_bulk_ctrl_endpoint = 0x00,
+ /* parameter for the MPEG2-data transfer */
+ .num_adapters = 1,
+ .adapter={
+ {
+ .frontend_attach = opera1_frontend_attach,
+ .streaming_ctrl = opera1_streaming_ctrl,
+
+ .caps=DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING,
+ .pid_filter = opera1_pid_filter,
+ .pid_filter_count = 252,
+ .stream = {
+ .type = USB_BULK,
+ .count = 10,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 0x200,
+ }
+ }
+ },
+ }
+ },
+
+ .num_device_descs = 1,
+ .devices = {
+ { "Opera1 DVB-S USB2.0",
+ { &opera1_table[0], NULL },
+ { &opera1_table[1], NULL },
+ },
+ /* { "Opera1 DVB-S USB2.0 wrong product ID",
+ { &opera1_table[2], NULL },
+ { &opera1_table[3], NULL },
+ },*/
+ }
+};
+
+
+static int opera1_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct dvb_usb_device *d;
+ struct usb_device* udev=interface_to_usbdev(intf);
+
+ if (udev->descriptor.idProduct==USB_PID_OPERA1_WARM &&
+ udev->descriptor.idVendor==USB_VID_OPERA1_WARM &&
+ (d==NULL || opera1_xilinx_load_firmware(udev,"opera1-fpga.fw")!=0 )
+ ){
+ return -EINVAL;
+ }
+
+ if (dvb_usb_device_init(intf,&opera1_properties,THIS_MODULE,&d) != 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static struct usb_driver opera1_driver = {
+ .name = "opera1",
+ .probe = opera1_probe,
+ .disconnect = dvb_usb_device_exit,
+ .id_table = opera1_table,
+};
+
+static int __init opera1_module_init(void)
+{
+ int result=0;
+// mutex_init(&mymutex);
+ if ((result = usb_register(&opera1_driver))) {
+ err("usb_register failed. Error number %d",result);
+ }
+ return result;
+}
+
+static void __exit opera1_module_exit(void)
+{
+ usb_deregister(&opera1_driver);
+}
+
+module_init (opera1_module_init);
+module_exit (opera1_module_exit);
+
+MODULE_AUTHOR("Mario Hlawitschka (c) dh1pa@xxxxxxxxx");
+MODULE_AUTHOR("Marco Gittler (c) g.marco@xxxxxxxxxx");
+MODULE_DESCRIPTION("Driver for Opera1 DVB-S device");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
+
diff -r 42b9d09cff15 linux/drivers/media/dvb/dvb-usb/opera1.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/linux/drivers/media/dvb/dvb-usb/opera1.h Sat Feb 24 14:02:20 2007 +0100
@@ -0,0 +1,38 @@
+#ifndef _OPERA1_H_
+#define _OPERA1_H_
+
+
+#define DVB_USB_LOG_PREFIX "opera"
+#include "dvb-usb.h"
+#include "dvb_frontend.h"
+#include <linux/version.h>
+extern int dvb_usb_opera1_debug;
+#define deb_xfer(args...) dprintk(dvb_usb_opera1_debug,0x02,args)
+
+struct opera_rc_keys {
+ u32 keycode;
+ u32 event;
+};
+///Send Querys
+
+#define QUERY_RC 0x01
+#define WAIT_FOR_COMPLETE 0x02
+
+///Register on Cypress
+
+#define READ_FX2_REG_REQ 0xBA
+#define OPERA_WRITE_FX2 0xBB
+
+#define OPERA_TUNER_REQ 0xB1
+#define OPERA_TUNER1_REQ 0xb6
+#define OPERA_TUNER2_REQ 0xb7
+#define OPERA_REMOTE 0xB8
+#define OPERA_TUNER4_REQ 0xbb
+#define OPERA_TUNER5_REQ 0xbc
+
+#define USB_VID_OPERA1_WARM 0x695C /*do we have such a thing?*/
+#define USB_PID_OPERA1_COLD 0x2830
+#define USB_PID_OPERA1_COLD2 0x8613
+#define USB_PID_OPERA1_WARM 0x3829 /*do we have such a thing?*/
+
+#endif
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
