Hi All, I'm trying to get a Technotrend TT-1500 (DVB-T) with the daughter CI to work with my legal smart card and a DualCAM (using Conax). The local DTV provider has a number of completely encrypted channels and some that are actually FTA but are marked as encrypted. If I tune to these latter channels _without_ placing my cam in the CI then I can receive the channels fine. However, as soon as I slot in the CAM, the picture starts to break up as does the sound. The encrypted channels always have picture and sound problems. I've checked the log (/var/log/messages, I'm running FC6 64bit kernel 2.6.18-1.2869) and it says that the CAM has been initialised successfully and not much else. The kernel automatically loads the drivers saa7146: register extension 'budget_ci dvb'. saa7146: found saa7146 @ mem ffffc2000001e000 (revision 1, irq 5) (0x13c2,0x1012). saa7146 (0): dma buffer size 192512 DVB: registering new adapter (TT-Budget-T-CI PCI). adapter has MAC addr = 00:d0:5c:04:43:84 input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input3 budget_ci: CI interface initialised Uniform CD-ROM driver Revision: 3.20 DVB: registering frontend 0 (Philips TDA10046H DVB-T)... lspci -vv 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: Technotrend Systemtechnik GmbH Unknown device 1012 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (3750ns min, 9500ns max) Interrupt: pin A routed to IRQ 5 Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=512] lsmod: dvb_core 100784 2 budget_ci,budget_core i2c_core 33729 7 tda1004x,budget_ci,budget_core,ttpci_eeprom,i2c_ec,nvidia,i2c_viapro Is this card plus CI supported? I've found mention of it in the source code in budget-ci.c, but the "Subsystem: Technotrend Systemtechnik GmbH Unknown device 1012" would seem to indicate that it's not being completely recognised. Any help is greatly appreciated. Btw, the same CAM + smart card works perfectly in my Twinhan DVB-T VP3040. TIA Veronica _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
