Ok, after upgrading Linux-DVB, my system now seem to see my Liteon, but claims that "no frontend attached". This seem to be some sort of simple "i-am-such-a-newbie"-error, but Google doesn't seem to help me today. What am I missing? usb 5-8: new high speed USB device using ehci_hcd and address 3 usb 5-8: configuration #1 chosen from 1 choice dvb-usb: found a 'LITE-ON USB2.0 DVB-T Tuner' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dibusb-6.0.0.8.fw' usb 5-8: USB disconnect, address 3 dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. usb 5-8: new high speed USB device using ehci_hcd and address 4 usb 5-8: configuration #1 chosen from 1 choice dvb-usb: found a 'LITE-ON USB2.0 DVB-T Tuner' in warm state. i2c_adapter i2c-1: SMBus Quick command not supported, can't probe for chips dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (LITE-ON USB2.0 DVB-T Tuner). dvb-usb: no frontend was attached by 'LITE-ON USB2.0 DVB-T Tuner' input: IR-receiver inside an USB DVB receiver as /class/input/input3 dvb-usb: schedule remote query interval to 150 msecs. dvb-usb: LITE-ON USB2.0 DVB-T Tuner successfully initialized and connected. -- Meddelandet har kontrollerats mot virus samt skadligt innehåll av MailScanner och förmodas vara säkert. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
