An archive with photos and inf files can be found at the url below,
http://userweb.elec.gla.ac.uk/d/dougiemc/pinnacle_250.tar.gz
I'm assuming from the bottom of the box that the model number is 250i, I
can't see any other indication of a model number.
I'll be happy to provide anything else which is of use :)
Dougie
lspci -v
00:0c.0 Multimedia controller: Pinnacle Systems Inc. Unknown device 0040
Subsystem: Pinnacle Systems Inc. Unknown device 0047
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at db001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
00:0c.2 Multimedia controller: Pinnacle Systems Inc. Unknown device 0042
Subsystem: Pinnacle Systems Inc. Unknown device 0047
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at db002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
lspci-vn
00:0c.0 0480: 11bd:0040
Subsystem: 11bd:0047
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at db001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
00:0c.2 0480: 11bd:0042
Subsystem: 11bd:0047
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at db002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
And for good measure...
scanpci -v
pci bus 0x0000 cardnum 0x0c function 0x00: vendor 0x11bd device 0x0040
Pinnacle Systems Inc. Device unknown
CardVendor 0x11bd card 0x0047 (Card unknown)
STATUS 0x3290 COMMAND 0x0006
CLASS 0x04 0x80 0x00 REVISION 0x00
BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x08
BASE0 0xdb001000 addr 0xdb001000 MEM
MAX_LAT 0x10 MIN_GNT 0x02 INT_PIN 0x01 INT_LINE 0x0b
BYTE_0 0x01 BYTE_1 0x00 BYTE_2 0x42 BYTE_3 0x06
pci bus 0x0000 cardnum 0x0c function 0x02: vendor 0x11bd device 0x0042
Pinnacle Systems Inc. Device unknown
CardVendor 0x11bd card 0x0047 (Card unknown)
STATUS 0x3290 COMMAND 0x0006
CLASS 0x04 0x80 0x00 REVISION 0x00
BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x08
BASE0 0xdb002000 addr 0xdb002000 MEM
MAX_LAT 0x10 MIN_GNT 0x02 INT_PIN 0x01 INT_LINE 0x0b
BYTE_0 0x01 BYTE_1 0x00 BYTE_2 0x42 BYTE_3 0xfe
--- Begin Message ---
Certainly,
An archive with photos and inf files can be found at the url below,
http://userweb.elec.gla.ac.uk/d/dougiemc/pinnacle_250.tar.gz
I'm assuming from the bottom of the box that the model number is 250i, I
can't see any other indication of a model number.
I'll be happy to provide anything else which is of use :)
Dougie
lspci -v
00:0c.0 Multimedia controller: Pinnacle Systems Inc. Unknown device 0040
Subsystem: Pinnacle Systems Inc. Unknown device 0047
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at db001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
00:0c.2 Multimedia controller: Pinnacle Systems Inc. Unknown device 0042
Subsystem: Pinnacle Systems Inc. Unknown device 0047
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at db002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
lspci-vn
00:0c.0 0480: 11bd:0040
Subsystem: 11bd:0047
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at db001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
00:0c.2 0480: 11bd:0042
Subsystem: 11bd:0047
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at db002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
And for good measure...
scanpci -v
pci bus 0x0000 cardnum 0x0c function 0x00: vendor 0x11bd device 0x0040
Pinnacle Systems Inc. Device unknown
CardVendor 0x11bd card 0x0047 (Card unknown)
STATUS 0x3290 COMMAND 0x0006
CLASS 0x04 0x80 0x00 REVISION 0x00
BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x08
BASE0 0xdb001000 addr 0xdb001000 MEM
MAX_LAT 0x10 MIN_GNT 0x02 INT_PIN 0x01 INT_LINE 0x0b
BYTE_0 0x01 BYTE_1 0x00 BYTE_2 0x42 BYTE_3 0x06
pci bus 0x0000 cardnum 0x0c function 0x02: vendor 0x11bd device 0x0042
Pinnacle Systems Inc. Device unknown
CardVendor 0x11bd card 0x0047 (Card unknown)
STATUS 0x3290 COMMAND 0x0006
CLASS 0x04 0x80 0x00 REVISION 0x00
BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x08
BASE0 0xdb002000 addr 0xdb002000 MEM
MAX_LAT 0x10 MIN_GNT 0x02 INT_PIN 0x01 INT_LINE 0x0b
BYTE_0 0x01 BYTE_1 0x00 BYTE_2 0x42 BYTE_3 0xfe
Gunther Mayer wrote:
Hi,
can you send me a picture of your card and further info for inclusion
to my
http://www.bttv-gallery.de ?
1st priority:
- picture of the card, the card backside (high resolution pics if
feasible)
- lspci -v
- lspci -vn
further information:
- pictures of remote control and of original package (if feasible)
- all *.INF from the Windows driver CD
Regards, Gunther
Dougie McGilvray wrote:
Hi there.
I just purchased a PCTV PCI card. Being a single tuner card, I
believed it to be a 300i. The only suggestion as to the specific
model number is 250i, However, it seems that the card is a clone of
the dual tuner card with an empty space where the other tuner IC
should be. The following output from scanpci seems to support this
theory, which shows two unknown devices which match two of the three
devices for the dual tuner card on the PCI DVB-T wiki page:
http://www.linuxtv.org/wiki/index.php/PCI_devices_DVB-T
I'm hoping it isn't too difficult to add support for this card, I'm
happy to modify and test the code, al long as someone someone can
give some advice of where exactly to start.
Cheers,
Dougie
Two IP's are visible:
1. is labelled WJCE6353 which appears to be the same as a ZL10353
demuxer
2. is labelled as DTV Bridge 0635MP002
root@maximum:~# lspci -vvv
---
00:0c.0 Multimedia controller: Pinnacle Systems Inc. Unknown device 0040
Subsystem: Pinnacle Systems Inc. Unknown device 0047
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort+ <MAbort+ >SERR- <PERR-
Latency: 32 (500ns min, 4000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at db001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.2 Multimedia controller: Pinnacle Systems Inc. Unknown device 0042
Subsystem: Pinnacle Systems Inc. Unknown device 0047
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort+ <MAbort+ >SERR- <PERR-
Latency: 32 (500ns min, 4000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at db002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
---
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
--
_________________________________________
Douglas McGilvray
Centre for Music Technology
Rankine Building
University of Glasgow
Glasgow, G12 8QQ
http://cmt.gla.ac.uk/
--- End Message ---
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb