Hi all,
This was working with my Suse box, I've just done an upgrade to Opensuse
10.2 and it now won't work.
It appears to see the stick as dmesg shows .....
dvb-usb: found a 'MSI Mega Sky 580 DVB-T USB2.0' in cold state, will try to
load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-megasky-02.fw'
dvb_usb_m920x: probe of 5-5:1.0 failed with error 64
usbcore: registered new driver dvb_usb_m920x
usb 5-5: USB disconnect, address 2
usb 5-5: new high speed USB device using ehci_hcd and address 3
usb 5-5: new device found, idVendor=0db0, idProduct=5580
usb 5-5: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-5: Product: DTV USB MINI
usb 5-5: Manufacturer: ULi Electronics
usb 5-5: configuration #1 chosen from 1 choice
dvb-usb: found a 'MSI Mega Sky 580 DVB-T USB2.0' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (MSI Mega Sky 580 DVB-T USB2.0).
DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
DVB: Unable to find symbol qt1010_attach()
input: IR-receiver inside an USB DVB receiver as /class/input/input3
dvb-usb: schedule remote query interval to 100 msecs.
dvb-usb: MSI Mega Sky 580 DVB-T USB2.0 successfully initialized and
connected.
But when I run kaffeine it can't find any channels and gives the following
errors ....
Tuning to: SKY THREE / autocount: 0
Using DVB device 0:0 "Zarlink MT352 DVB-T"
tuning DVB-T to 546000000 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
...............
Not able to lock to the signal on the given frequency
Frontend closed
Tuning delay: 1841 ms
Can anyone help please
Thanks Nick
----------------------------------------------------------------------------
Nick Bruton PADI Divemaster #624215
University of Bristol Yamaha YZF R1
Computing Service
Tyndall Avenue
Bristol BS8 1UD
Tel: 0117 9288193
Team email: isys-srct@xxxxxxxxxx
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
