Hi there.
I just purchased a PCTV PCI card. Being a single tuner card, I believed
it to be a 300i. The only suggestion as to the specific model number is
250i, However, it seems that the card is a clone of the dual tuner card
with an empty space where the other tuner IC should be. The following
output from scanpci seems to support this theory, which shows two
unknown devices which match two of the three devices for the dual tuner
card on the PCI DVB-T wiki page:
http://www.linuxtv.org/wiki/index.php/PCI_devices_DVB-T
I'm hoping it isn't too difficult to add support for this card, I'm
happy to modify and test the code, al long as someone someone can give
some advice of where exactly to start.
Cheers,
Dougie
Two IP's are visible:
1. is labelled WJCE6353 which appears to be the same as a ZL10353 demuxer
2. is labelled as DTV Bridge 0635MP002
root@maximum:~# lspci -vvv
---
00:0c.0 Multimedia controller: Pinnacle Systems Inc. Unknown device 0040
Subsystem: Pinnacle Systems Inc. Unknown device 0047
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort+ <MAbort+ >SERR- <PERR-
Latency: 32 (500ns min, 4000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at db001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.2 Multimedia controller: Pinnacle Systems Inc. Unknown device 0042
Subsystem: Pinnacle Systems Inc. Unknown device 0047
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort+ <MAbort+ >SERR- <PERR-
Latency: 32 (500ns min, 4000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at db002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
---
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb