Hi all, I'm just trying to install my new HVR 4000 using Steven Toth's multiproto patches on a 2.6.18 kernel (Suse 10.2). Looks pretty good so far, however I'm missing the required firmware file. Is there someone, who can help me with this problem? See the logs below: Jan 20 17:47:38 obelix kernel: Linux video capture interface: v2.00 Jan 20 17:47:38 obelix kernel: cx2388x v4l2 driver version 0.0.6 loaded Jan 20 17:47:38 obelix kernel: PCI: Enabling device 0000:05:08.0 (0000 -> 0002) Jan 20 17:47:38 obelix kernel: ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 82 Jan 20 17:47:38 obelix kernel: CORE cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=53,autodetected] Jan 20 17:47:38 obelix kernel: TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe Jan 20 17:47:38 obelix kernel: i2c-algo-bit.o: (0) scl=1, sda=1 Jan 20 17:47:38 obelix kernel: i2c-algo-bit.o: (1) scl=1, sda=0 Jan 20 17:47:38 obelix kernel: i2c-algo-bit.o: (2) scl=1, sda=1 Jan 20 17:47:38 obelix kernel: i2c-algo-bit.o: (3) scl=0, sda=1 Jan 20 17:47:38 obelix kernel: i2c-algo-bit.o: (4) scl=1, sda=1 Jan 20 17:47:38 obelix kernel: i2c-algo-bit.o: cx88[0] passed test. Jan 20 17:47:38 obelix kernel: tveeprom 2-0050: Hauppauge model 69009, rev B2A0, serial# 1387233 Jan 20 17:47:38 obelix kernel: tveeprom 2-0050: MAC address is 00-0D-FE-15-2A-E1 Jan 20 17:47:38 obelix kernel: tveeprom 2-0050: tuner model is Philips FMD1216ME (idx 100, type 63) Jan 20 17:47:38 obelix kernel: tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) Jan 20 17:47:38 obelix kernel: tveeprom 2-0050: audio processor is CX882 (idx 33) Jan 20 17:47:38 obelix kernel: tveeprom 2-0050: decoder processor is CX882 (idx 25) Jan 20 17:47:38 obelix kernel: tveeprom 2-0050: has radio, has IR remote Jan 20 17:47:38 obelix kernel: cx88[0]: hauppauge eeprom: model=69009 Jan 20 17:47:38 obelix kernel: input: cx88 IR (Hauppauge WinTV-HVR400 as /class/input/input6 Jan 20 17:47:38 obelix kernel: cx88[0]/0: found at 0000:05:08.0, rev: 5, irq: 82, latency: 32, mmio: 0xd8000000 Jan 20 17:47:38 obelix kernel: cx88[0]/0: registered device video0 [v4l2] Jan 20 17:47:38 obelix kernel: cx88[0]/0: registered device vbi0 Jan 20 17:47:38 obelix kernel: cx88[0]/0: registered device radio0 Jan 20 17:48:08 obelix kernel: cx2388x dvb driver version 0.0.6 loaded Jan 20 17:48:08 obelix kernel: ACPI: PCI Interrupt 0000:05:08.2[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 82 Jan 20 17:48:08 obelix kernel: cx88[0]/2: found at 0000:05:08.2, rev: 5, irq: 82, latency: 32, mmio: 0xda000000 Jan 20 17:48:08 obelix kernel: cx88[0]/2: cx2388x based dvb card Jan 20 17:48:08 obelix kernel: cx24116: cx24116_attach Jan 20 17:48:08 obelix kernel: DVB: registering new adapter (cx88[0]). Jan 20 17:48:08 obelix kernel: DVB: registering frontend 0 (Conexant CX24116/CX24118)... Jan 20 17:48:30 obelix kernel: cx24116: cx24116_initfe() Jan 20 17:48:33 obelix kernel: cx24116: cx24116_get_algo() Jan 20 17:48:33 obelix kernel: cx24116: cx24116_set_tone(1) Jan 20 17:48:33 obelix kernel: cx24116: cx24116_cmd_execute() Jan 20 17:48:33 obelix kernel: cx24116: cx24116_firmware_ondemand() Jan 20 17:48:33 obelix kernel: cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)... Jan 20 17:48:33 obelix kernel: cx24116_firmware_ondemand: Waiting for firmware upload(2)... Jan 20 17:48:33 obelix kernel: cx24116_firmware_ondemand: No firmware uploaded (timeout or file not found?) Jan 20 17:48:33 obelix kernel: cx24116_cmd_execute(): Unable initialise the firmware Jan 20 17:48:33 obelix firmware.sh[6588]: Cannot find firmware file 'dvb-fe-cx24116.fw' Jan 20 17:48:33 obelix kernel: cx24116: cx24116_set_tone(1) Jan 20 17:48:33 obelix kernel: cx24116: cx24116_cmd_execute() Best regards Uwe _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
