----- "Will Colwyn" <will@xxxxxxxxxxxxxxxxxx> wrote: > David Stevenson wrote: > > > >>Looks like the initial scan file for Mendip is wrong. The frequency > > >>/should/ be 778167000. (Mux1 is on channel 59+ according to the DTG > >>website) > >> > > > > > > I tried this, thanks for the info. It still fails to tune. After you > mentioned the DTG, I found the website and had a look. I assume there > is some magic calculation as I do not see how you extrapolated > 778167000 from the figures in their table ;-) > > Frequency = 306+(channel*8) MHz, with possibly +/- 167KHz offset > > > Here is the line from my new uk-Mendip file: > > > > T 778167000 8MHz 2/3 NONE QAM16 2k 1/32 NONE > > > > Try > > T 778167000 8MHz 3/4 NONE QAM16 2k 1/32 NONE > > No joy - same error. Here is what I do know, the aerial is fine and a signal is received by the TV Digibox. >From my first email, did the subsystem appear to be in order? I keep thinking that something is missing... but from my search I cannot find it. Is there any tests that I can do? I feel like I am flying blind and following this guide and that one but I do not really know if "stuff" is relevant as it appears these drivers/cards evolve very quickly (as does the kernel). TIA David. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
