David Stevenson wrote:
Hi all,
I am having problems setting this card which I purchased recently after looking at the supported list for DVB-T hardware. I wondered if anyone here could point me in the direction as I seem to be meandering in the dark, so here goes...
I am using Ubuntu 6.10 with kernel 2.6.17-10-generic, the machine is 32bit and uses a NVidia dual head graphics card (not sure if that last piece is important).
My aerial supply's a signal to a DigiFusion digi box which sits next to the PC (until I get the FlyDVB working) and receives a great signal. Aerial is pointing (visual line of sight) towards uk-Mendip (distance ~15 miles).
My symptoms are simply that using 'scan' - I cannot tune any channels using:
% scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/uk-Mendip
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/uk-Mendip
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 754167000 0 2 9 1 0 0 0
tune to: 754167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
tune to: 754167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
Looks like the initial scan file for Mendip is wrong. The frequency
/should/ be 778167000. (Mux1 is on channel 59+ according to the DTG website)
Will
--
Will Colwyn <will@xxxxxxxxxxxxxxxxxx>
Watergate Technologies Limited
www.watergate-tech.com
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
