Hi all,
I've tried the patch, and now the usb card gets recognized:
dib0700: loaded with support for 2 different device-types
dvb-usb: found a 'Asus My Cinema-U3000 Mini' in cold state, will try to
load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw'
dib0700: firmware started successfully.
...
dvb-usb: found a 'Asus My Cinema-U3000 Mini' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (Asus My Cinema-U3000 Mini).
DVB: registering frontend 0 (DiBcom 7000PC)...
dvb-usb: Asus My Cinema-U3000 Mini successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700
But when i try to scan channels, it founds nothing, the output of 'scan
/usr/share/doc/dvb-utils/examples/scan/dvb-t/es-Madrid' gives me:
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/es-Madrid
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 770000000 0 2 1 3 1 3 0
initial transponder 810000000 0 2 1 3 1 3 0
initial transponder 834000000 0 2 1 3 1 3 0
initial transponder 842000000 0 2 1 3 1 3 0
initial transponder 850000000 0 2 1 3 1 3 0
initial transponder 858000000 0 2 1 3 1 3 0
>>> tune to:
770000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
770000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
810000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
810000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
834000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
834000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
842000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
842000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
850000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
850000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
858000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
858000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
I've found a channels.conf for Madrid (my city) on
/usr/share/doc/dvb-utils/examples, and copied it to /root/.tzap, but
when i try the command 'tzap TELECINCO' (for example) it outputs:
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 770000000 Hz
video pid 0x0191, audio pid 0x0193
status 10 | signal ff77 | snr 0000 | ber 02000200 | unc 0000b593 |
FE_HAS_LOCK
status 10 | signal ff77 | snr 0000 | ber 02000200 | unc 0000b593 |
FE_HAS_LOCK
status 10 | signal ff77 | snr 0000 | ber 02000200 | unc 0000b593 |
FE_HAS_LOCK
status 10 | signal ff77 | snr 0000 | ber 02000200 | unc 0000b593 |
FE_HAS_LOCK
status 10 | signal ff77 | snr 0000 | ber 02000200 | unc 0000b593 |
FE_HAS_LOCK
I have dvb-t signal where i have the pc; and also the card comes with a
pluggable antenna i've tried with the same results.
Any ideas?
Thanks again,
David
------------------------------------------------------------------------
Logo mainsip <http://www.mainsip.com>
C/ Isabel de Farnesio Nº 20 - Local 4 || C.P. 28660 - Boadilla del Monte
(Madrid)
Teléfono 91 632 69 50 - Fax 91 632 69 18
www.mainsip.com <http://www.mainsip.com> - info@xxxxxxxxxxx
<mailto:info@xxxxxxxxxxx>
david@xxxxxxxxxxx escribió:
Thanks!
I'll try it on thursday, i have no access to the debian machine now, and
mail you the results.
David
Con fecha 30/12/2006, "Patrick Boettcher" <patrick.boettcher@xxxxxxx>
escribió:
Hi,
The only thing you are missing is to put the USB IDs into
dib0710_device.c .
The attached patch tries to do that... Can you please check it and report
whether it works or not?
Patrick.
On Fri, 29 Dec 2006, David Palomares wrote:
Hello
I've got a USB DVB-T from Asus, and am trying to get it working on
Debian. It has a STK7700 inside (from lsusb -v, attached) so i've
updated the vendor id's and device id's to add this card. So far, it
gets recognized, but i have no /dev/dvb dir, the firmware is on
/lib/firmware and /usr/lib/hotplug/firmware (dvb-usb-dibusb-6.0.0.8.fw)
but dmesg gives me no message about firmware being loaded or not. What
else can i try?
Thanks,
David
Here is the relevant lsusb -v output
Bus 001 Device 003: ID 0b05:171f ASUSTek Computer, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0b05 ASUSTek Computer, Inc.
idProduct 0x171f
bcdDevice 1.00
iManufacturer 1 DIBCOM
iProduct 2 STK7700
iSerial 3 6A17101116
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
And now the dmesg
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
...
dib0700: loaded with support for 2 different device-types
usbcore: registered new interface driver dvb_usb_dib0700
...
And last the lsmod output
Module Size Used by
ipv6 218976 14
ppdev 9348 0
lp 11076 0
button 6800 0
ac 5380 0
battery 10244 0
loop 15496 0
snd_seq_dummy 3972 0
snd_seq_oss 29184 0
snd_seq_midi 8480 0
snd_seq_midi_event 7040 2 snd_seq_oss,snd_seq_midi
snd_seq 44240 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_via82xx 26648 0
gameport 14344 1 snd_via82xx
snd_ac97_codec 89120 1 snd_via82xx
snd_ac97_bus 2432 1 snd_ac97_codec
snd_pcm_oss 39200 0
snd_mixer_oss 15744 1 snd_pcm_oss
snd_pcm 70024 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_timer 20100 2 snd_seq,snd_pcm
snd_page_alloc 9864 2 snd_via82xx,snd_pcm
snd_mpu401_uart 7808 1 snd_via82xx
evdev 9472 0
snd_rawmidi 22432 2 snd_seq_midi,snd_mpu401_uart
snd_seq_device 7948 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
dvb_usb_dib0700 13704 0
dib7000m 14084 1 dvb_usb_dib0700
dib7000p 12676 1 dvb_usb_dib0700
dvb_usb 22924 1 dvb_usb_dib0700
rtc 11828 0
dvb_core 73128 1 dvb_usb
snd 47972 11
snd_seq_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
firmware_class 9856 1 dvb_usb
dvb_pll 14212 1 dvb_usb
soundcore 7520 1 snd
dib3000mc 11908 1 dvb_usb_dib0700
dibx000_common 3972 3 dib7000m,dib7000p,dib3000mc
pcspkr 2944 0
vt8231 15244 0
parport_pc 32548 1
parport 35144 3 ppdev,lp,parport_pc
i2c_isa 5504 1 vt8231
i2c_viapro 8468 0
via_agp 9856 1
agpgart 30000 1 via_agp
ide_generic 1536 0 [permanent]
ide_cd 36384 0
cdrom 33568 1 ide_cd
ide_disk 15488 3
via_rhine 22664 0
mii 5504 1 via_rhine
uhci_hcd 21000 0
usbcore 119556 4 dvb_usb_dib0700,dvb_usb,uhci_hcd
via82cxxx 8708 0 [permanent]
generic 5508 0 [permanent]
ide_core 111368 5
ide_generic,ide_cd,ide_disk,via82cxxx,generic
thermal 14088 0
processor 23596 1 thermal
fan 4868 0
--
------------------------------------------------------------------------
Logo mainsip <http://www.mainsip.com>
C/ Isabel de Farnesio Nº 20 - Local 4 || C.P. 28660 - Boadilla del Monte
(Madrid)
Teléfono 91 632 69 50 - Fax 91 632 69 18
www.mainsip.com <http://www.mainsip.com> - info@xxxxxxxxxxx
<mailto:info@xxxxxxxxxxx>
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
begin:vcard
fn:David Palomares Torres
n:Palomares Torres;David
org;quoted-printable:mainsip;Asistencia T=C3=A9cnica
adr;quoted-printable;quoted-printable:;;Avda. Isabel de Farnesio, n=C2=BA 20 - local 4;Boadilla del Monte;Madrid;28660;Espa=C3=B1a
email;internet:david@xxxxxxxxxxx
title:mainsip
tel;work:91 632 69 50
tel;fax:91 632 69 18
url:http://www.mainsip.com
version:2.1
end:vcard
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
