Michel Verbraak wrote: > Manu Abraham schreef: >> Michel Verbraak wrote: >> >>> Manu Abraham schreef: >>> >>>> Elmar Schmidt wrote: >>>> >>>> >>>>> Hi, >>>>> has anyone a workaround for the unscanable Transponders (for example on >>>>> Astra 19.2E)? >>>>> >>>>> DVB works but I can't access all Transponders (I think they have >>>>> analogue Channels). With Windows it works, so there is no SAT or Card >>>>> Issue. >>>>> >>>>> I have posted a full scan Output in this Thread: >>>>> >>>>> http://linuxtv.org/pipermail/linux-dvb/2006-December/014720.html >>>>> >>>>> >>>>> >>>> Can you verify whether manually adding in the frequency (the hard way, >>>> by hand) to your channels.conf and doing a szap gives you a FE_LOCK for >>>> the frequency that cannot be scanned ? >>>> >>>> Trying to understand what's missing. >>>> >>>> >>>> Manu >>>> >>>> >>> Manu, >>> >>> I can confirm that when I enter a channel manually to my channels.conf >>> file I do get a FE_LOCK with szap. >>> >>> >> >> for those channels which don't otherwise are not seen in a scan ? >> >> >>> Output from szap: >>> bash-3.1$ /data2/hg/dvb-apps/util/szap.old/szap -c Astra-19.2E.conf >>> "Nederland1" >>> reading channels from file 'Astra-19.2E.conf' >>> zapping to 1 'Nederland1': >>> sat 0, frequency = 12515 MHz H, symbolrate 22000000, vpid = 0x0205, apid >>> = 0x0058 sid = 0x0fab >>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' >>> set to frequency 1915000status 00 | signal 0000 | snr 0008 | ber >>> bfab5b38 | unc 0804c794 | >>> status 14 | signal 0000 | snr 000f | ber bfab5b38 | unc 0804c794 | >>> FE_HAS_LOCK >>> status 14 | signal 0000 | snr 000f | ber bfab5b38 | unc 0804c794 | >>> FE_HAS_LOCK >>> status 14 | signal 0000 | snr 000f | ber bfab5b38 | unc 0804c794 | >>> FE_HAS_LOCK >>> >>> Content of Astra-19.2E.conf (my channels.conf) >>> Nederland1:12515:h:0:22000:517:88:4011 >>> >>> Values for this channels were taken from >>> http://nl.kingofsat.net/pos-19.2E.php. >>> >>> In the messages.log file I get the usual which ends with >>> Dec 29 15:30:40 garfield kernel: mb86a16_set_fe: NO -- SIGNAL >>> >>> I did a scan on multiple satellites with transponder lists from >>> http://kingofsat.net. I will put up the results in the next couple of days. >>> >>> >> >> Cool. >> >> Thanks, >> Manu >> > As promised. > (Because the attachment was to big hereby a link to my test results for > now http://www.verbraak.org/scantest-vp1034.tar.gz) > > Examination of 5 Satellites: Thor 0.8W, Hotbird 13.0E, Astra1 19.2E, > Astra3 23.5E and Astra2 28.2E > Files in the fullscan directory contain the scan results when the > corresponding transponder files are used. So these channels are found on > the different satellites on my system VP-1034 + Rotor (Palm sg 2100A) + > LNB (Smart TSX Titanium Edition NF 0.2dB) > Files in the allchannels directory contain all the channels which should > be available on the satellite according to http://nl.kingofsat.net > Files in the missing directory are the differences between fullscan and > allchannels. > The *.freq-polar-sr files contain the uniq > frequency:polarization:symbolrate values per satellite. > > When I tried to szap for the missing channels I only saw FE_HAS_LOCK > until my machine locked up machine locked up on a szap ? can you provide the logs when you szap 'ed to this missing channel ? Does this channel exist ? but even if it doesn't exist, i don't see any reason why it should lock up. Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
