I am continuing to try and work out why my Nova-T stick doesn't work.
I've got the latest dvb-apps from hg and built them
When I run femon, while xine is running successfully watching TV I get
the following:
femon
FE: DiBcom 7000PC (DVBT)
status V | signal 7c9c | snr 0000 | ber 02000200 | unc 00008363 |
status | signal 7c9c | snr 0000 | ber 02000200 | unc 00008363 |
status | signal 7c9c | snr 0000 | ber 02000200 | unc 00008363 |
I haven't found any info on the web about what the femon output is
supposed to look like, but I'm guessing that the absence of any mention
of LOCK etc. is not good?
However xine IS letting me watch TV, I'm guessing that this means that
xine doesn't bother to check for lock and just goes ahead and tunes and
tries to stream what it can?
Other things like mplayer and dvbstream fail saying they cannot get lock.
I'm guessing this means the driver isn't reporting correctly back to the
dvb system, as its clearly working fine, picture quality is good etc.
Has anyone come across this before? Could someone at least tell me what
the femon output should look like?
This is using the following kernel, drivers etc.
Via EPIA system, SP13000
v4l-dvb extracted from hg 3 days ago and compiled
base os fedora core 5, upgraded kernel installed: 2.6.18-1.2239.fc5
dvb modules loaded:
dvb_usb_dib0700 13832 15
dib7000m 14724 1 dvb_usb_dib0700
dib7000p 13316 2 dvb_usb_dib0700
dvb_usb 24076 1 dvb_usb_dib0700
dvb_core 79400 1 dvb_usb
dvb_pll 14596 1 dvb_usb
dib3000mc 12676 1 dvb_usb_dib0700
i2c_core 21697 11
vt1211,i2c_isa,eeprom,mt2060,dib7000m,dib7000p,dvb_usb,dvb_pll,dib3000mc,dibx000_common,i2c_viapro
kernel messages when loading shown below.
Dec 26 22:32:45 lounge kernel: dib0700: loaded with support for 2
different device-types
Dec 26 22:32:45 lounge kernel: dvb-usb: found a 'Hauppauge Nova-T Stick'
in warm state.
Dec 26 22:32:45 lounge kernel: i2c_adapter i2c-1: SMBus Quick command
not supported, can't probe for chips
Dec 26 22:32:45 lounge kernel: dvb-usb: will pass the complete MPEG2
transport stream to the software demuxer.
Dec 26 22:32:45 lounge kernel: DVB: registering new adapter (Hauppauge
Nova-T Stick).
Dec 26 22:32:45 lounge kernel: i2c_adapter i2c-2: SMBus Quick command
not supported, can't probe for chips
Dec 26 22:32:45 lounge kernel: DVB: registering frontend 0 (DiBcom
7000PC)...
Dec 26 22:32:45 lounge kernel: MT2060: successfully identified (IF1 = 1220)
Dec 26 22:32:46 lounge kernel: dvb-usb: Hauppauge Nova-T Stick
successfully initialized and connected.
Dec 26 22:32:46 lounge kernel: usbcore: registered new driver
dvb_usb_dib0700
Dec 26 22:32:51 lounge kernel: mt2060 I2C read failed
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
