Dear Christophe,
I try to get NIT information like below by using DVBsnoop.
---------------------------------------------------------------
I try to use this command as below:I try to get NIT information like below by using DVBsnoop.
---------------------------------------------------------------
PID: 16 (0x0010)
NIT-decoding....
Table_ID: 64 (0x40) [= network_information_section - actual network]
section_syntax_indicator: 1 (0x01)
reserved_1: 1 (0x01)
reserved_2: 3 (0x03)
Section_length: 279 (0x0117)
Network_ID: 1 (0x0001) [= Astra Satellite Network 19.2E / Satellite / SES]
reserved_3: 3 (0x03)
Version_number: 20 (0x14)
Current_next_indicator: 1 (0x01)
Section_number: 1 (0x01)
Last_Section_number: 1 (0x01)
reserved_4: 15 (0x0f)
Network_descriptor_length: 0 (0x0000)
reserved_5: 15 (0x0f)
Transport_stream_loop_length: 266 (0x010a)
Transport_stream_ID: 1279 (0x04ff)
Original_network_ID: 1 (0x0001) [= Astra Satellite Network 19,2°E | Société Européenne des Satellites]
reserved_1: 15 (0x0f)
Transport_descriptor_length: 13 (0x000d)
DVB-DescriptorTag: 67 (0x43) [= satellite_delivery_system_descriptor]
Descriptor_length: 11 (0x000b)
Frequency: 18453072 (= 11.99250 GHz)
Orbital_position: 402 (= 19.2)
West_East_flag: 1 (0x01) [= EAST]
Polarisation: 0 (0x00) [= linear - horizontal]
Modulation (Sat): 1 (0x01) [= QPSK]
Symbol_rate: 2576384 (= 27.5000)
FEC_inner: 3 (0x03) [= 3/4 conv. code rate]
......
------------------------------------------------------------------------------------
/dvbsnoop -if test.ts -n 500 0x10
but I didn't get the similar result like example
what kind't command should I input to get the similar result like example?
I can sure that the test.ts file has NIT information.
Thanks
Ye Hui
女 友 9 9 元 b u y 的 新 款 O N L Y
秋 冬 女 人 精 品 女 装 全 场 火 热 促 销 2 9 元 - 1 9 9 元 , 抢 呀 ( 图 )
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
