Hi, Micronas will probably release a driver for the drx3975d DVB-T demodulator within the next few weeks so let's wait for it.. This will be needed to get DVB-T work with that device. Markus On 12/5/06, Arno Reinhofer <arno@xxxxxxxx> wrote:
Hi Markus, I tried again today with new software and it recognized my stick without the need to modify sourcecode. But DVB mode still doesn't work (analog does). I don't know if it should or is still in progess. This is my dmesg output. If I can help somehow plz let me know. #modprobe em2880-dvb em28xx v4l2 driver version 0.0.1 loaded em28xx new video device (2304:0226): interface 0, class 255 em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 input: em2880/em2870 remote control as /class/input/input7 em28xx-input.c: remote control handler attached attach_inform: eeprom detected. em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4 1c em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00 em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00 em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03 em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 33 00 30 00 em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 36 00 31 00 30 00 30 00 em28xx #0: i2c eeprom b0: 31 00 30 00 30 00 33 00 37 00 36 00 37 00 00 00 em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EEPROM ID= 0x9567eb1a Vendor/Product ID= 2304:0226 AC97 audio (5 sample rates) 500mA max power Table at 0x27, strings=0x168e, 0x1ca4, 0x246a tuner 1-0061: chip found @ 0xc2 (em28xx #0) attach inform (default): detected I2C address c2 Tuner: setting up tuner core extension for: Xceive 3028 Tuner Loading base firmware: xc3028_init0.i2c.fw Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw attach_inform: tvp5150 detected. tvp5150 1-005c: tvp5150am1 detected. em28xx-video.c: requesting em28xx-audio! em28xx-video.c: requesting em2880-dvb! em28xx #0: V4L2 VBI device registered as /dev/vbi0 em28xx #0: V4L2 device registered as /dev/video0 em28xx #0: Found Pinnacle Hybrid Pro (2) usbcore: registered new driver em28xx em2880-dvb.c: DVB Init em2880-dvb.c: unsupported device em2880-dvb.c: failed initializing zl10353 DVB-T demodulator em2880-dvb.c: retrying with mt352 DVB-T demodulator FIXME: Write failed, backtrace: =============================== 7f ================================ mt352_read_register: readreg error (reg=127, ret==-19) em2880-dvb.c: no luck with mt352 demodulator, not attaching em2880-dvb em2880-dvb.c: DVB-T demodulator not reachable, did you try "modprobe em28xx device_mode=1" Em28xx: Initialized (Em2880 DVB Extension) extension Markus Rechberger wrote: > Hi, > > just wait a few more days, my testdevice should arrive soon then I'll > add support for it. > > cheers, > Markus > > On 11/28/06, Arno Reinhofer <arno@xxxxxxxx> wrote: >> Hi, >> >> I was just wondering if anything happened for Pinnacle PCTV Hybrid Pro >> Stick 330E. >> I found a thread about this but with no result. >> >> I added a line in em28xx-cards to recognize my stick (id: 0x2304/0x226) >> and then tried out and could get analog tv running, but no audio and no >> digital video. >> >> How can I get things running? Can I help with anything? >> >> cheers, >> Arno >> >> _______________________________________________ >> linux-dvb mailing list >> linux-dvb@xxxxxxxxxxx >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >> > >
-- Markus Rechberger _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
