tomlohave@xxxxxxxxx wrote:
I also tested with the file modified according to the trick of Hermann
Pitton (add a positive offset of 167000Hz) :
Hello
Try with + 166000 Hz if you are in france
look here : http://doc.ubuntu-fr.org/materiel/tnt
Hi,
I made a success of with scan the channels with a vanilla Linux kernel
2.6.18 and the master v4l-dvb development repository (downloaded the
28/11/2006). I did not need to use kradio before. :o)
The firmware loaded correctly :
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:05:03.0, rev: 209, irq: 169, latency: 64,
mmio: 0xff7ff000
saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 Dual
[card=78,autodetected]
saa7133[0]: board init: gpio is 40000
saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 1-004b: chip found @ 0x96 (saa7133[0])
tuner 1-004b: setting tuner address to 61
tuner 1-004b: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
DVB: registering new adapter (saa7133[0]).
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xff7ff000 irq 169 registered as card -1
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: waiting for firmware upload...
tda1004x: found firmware revision 29 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 29 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 29 -- ok
The problem came from the initial scan file fr-Vannes. I tested all the
files for France with this script:
#! /bin/bash
for t in /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-*; do
/usr/bin/scan $t
done
And, I found two frequencies which run :
- fr-Orleans : 674166000
- fr-Toulouse : 698167000
There are two problems in the file fr-Vannes, the frequency can be
shifted of 166000 or 167000 and especially the value of the
"guard-interval" must be "1/32" and not "1/8".
I will search which is best shift 166000 or 167000, and I will post the
good file.
Regards.
--
==============================================
| FREDERIC MASSOT |
| http://www.juliana-multimedia.com |
| mailto:frederic@xxxxxxxxxxxxxxxxxxxxxx |
===========================Debian=GNU/Linux===
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
