Hi, Am Donnerstag, den 30.11.2006, 01:43 +0100 schrieb Hartmut Hackmann: > Hi, > > tomlohave@xxxxxxxxx wrote: > > > >> > >> > >> > >> I also tested with the file modified according to the trick of Hermann > >> Pitton (add a positive offset of 167000Hz) : > > > > Hello > > > > Try with + 166000 Hz if you are in france > > > > look here : http://doc.ubuntu-fr.org/materiel/tnt > > > > This can help you. > > > > Cheers, > > > > Tom. > > > An additional hint: > There are 2 variants of this card, one is without firmware eeprom. > Are there messages regarding invaid firmware in the kernel log after > you tried to tune the first time? > If yes, you need a recent snapshot from http://www.linuxtv.org/ > and a firmware image according to the instructions. > > Best regards > Hartmut > he is using the recent master repo and I pointed to the firmware difference already. (p7131 udev problem 4 weeks back) Also Frederic knows of this one report on this new card revision he has, accordingly the automated switch to the FM/RF antenna input in dvb-t mode doesn't come through. Still a radio app needs to be used once before to make it happen was said. I asked him for confirmation/testing, since this is strange enough. To set all to auto in the initial scan file(s), except bandwidth, might be also worth a try as always. Cheers, Hermann _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb