Markus Rechberger wrote: > On 11/27/06, Chris Lawrence <lordsutch@xxxxxxxxx> wrote: >> On 11/27/06, Markus Rechberger <mrechberger@xxxxxxxxx> wrote: >> > ok that's just what I thought.. >> > can you retry with the repository on >> > http://mcentral.de/hg/~mrec/v4l-dvb-kernel >> >> That did it: >> >> [ 2511.230000] Linux video capture interface: v2.00 >> [ 2511.237000] em28xx v4l2 driver version 0.0.1 loaded >> [ 2511.237000] em28xx new video device (2304:0227): interface 0, >> class 255 >> [ 2511.237000] em28xx #0: Alternate settings: 8 >> [ 2511.237000] em28xx #0: Alternate setting 0, max size= 0 >> [ 2511.237000] em28xx #0: Alternate setting 1, max size= 0 >> [ 2511.237000] em28xx #0: Alternate setting 2, max size= 1448 >> [ 2511.237000] em28xx #0: Alternate setting 3, max size= 2048 >> [ 2511.237000] em28xx #0: Alternate setting 4, max size= 2304 >> [ 2511.237000] em28xx #0: Alternate setting 5, max size= 2580 >> [ 2511.237000] em28xx #0: Alternate setting 6, max size= 2892 >> [ 2511.237000] em28xx #0: Alternate setting 7, max size= 3072 >> [ 2511.374000] Tuner: registering extension (Xceive 3028 Tuner) >> [ 2511.691000] attach_inform: eeprom detected. >> [ 2511.720000] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 >> 5c 03 8e 16 a4 1c >> [ 2511.720000] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 >> 00 00 00 00 00 00 >> [ 2511.720000] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 >> 00 00 5b 1c 00 00 >> [ 2511.720000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 >> 00 00 00 00 00 00 >> [ 2511.720000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 >> [ 2511.721000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 >> [ 2511.721000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 >> 24 03 50 00 69 00 >> [ 2511.721000] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 >> 65 00 20 00 53 00 >> [ 2511.721000] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 >> 73 00 00 00 16 03 >> [ 2511.721000] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 >> 38 00 30 00 30 00 >> [ 2511.721000] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 36 00 >> 30 00 38 00 30 00 >> [ 2511.721000] em28xx #0: i2c eeprom b0: 31 00 30 00 30 00 38 00 32 00 >> 37 00 38 00 00 00 >> [ 2511.721000] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 >> [ 2511.721000] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 >> [ 2511.721000] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 >> [ 2511.721000] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 >> [ 2511.721000] EEPROM ID= 0x9567eb1a >> [ 2511.721000] Vendor/Product ID= 2304:0227 >> [ 2511.721000] AC97 audio (5 sample rates) >> [ 2511.721000] 500mA max power >> [ 2511.721000] Table at 0x27, strings=0x168e, 0x1ca4, 0x246a >> [ 2511.725000] tuner 1-0061: chip found @ 0xc2 (em28xx #0) >> [ 2511.725000] attach inform (default): detected I2C address c2 >> [ 2511.735000] Tuner: setting up tuner core extension for: Xceive >> 3028 Tuner >> [ 2511.736000] Loading base firmware: xc3028_init0.i2c.fw >> [ 2512.874000] Loading default analogue TV settings: >> xc3028_BG_PAL_A2_A.i2c.fw >> [ 2513.099000] attach_inform: tvp5150 detected. >> [ 2513.132000] em28xx #0: found i2c device @ 0xa0 [eeprom] >> [ 2513.136000] em28xx #0: found i2c device @ 0xb8 [tvp5150a] >> [ 2513.138000] em28xx #0: found i2c device @ 0xc2 [tuner (analog)] >> [ 2513.150000] em28xx-video.c: requesting em28xx-audio! >> [ 2513.150000] em28xx-video.c: requesting em2880-dvb! >> [ 2513.156000] em28xx #0: V4L2 device registered as /dev/video0 >> [ 2513.156000] em28xx #0: Found Pinnacle PCTV HD Pro (Hybrid) >> [ 2513.156000] usbcore: registered new driver em28xx >> >> Incidentally, I've had no luck with tvtime since using the v4 >> firmware... there are no obvious error messages in dmesg, but it >> happens after loading the MN_NTSCPAL_A2 firmware: >> >> [ 2811.454000] xc3028_set_std, Loading specific configuration for >> requested mode xc3028_MN_NTSCPAL_A2.i2c.fw >> >> It doesn't hang the system... it just stops and doesn't do anything. >> The same problem occurs with kdetv. >> >> strace shows the freeze to be happening at >> >> ioctl(3, VIDIOC_DQBUF <unfinished ...> >> >> I can ^C out of it, at least. >> > > And this still works with the old firmware? > (note do not load the dvb/atsc module, once you loaded it analogue TV > will be switched off there's no switching back mechanism implemented > for your device yet) > > Markus Using the same code and doing "sudo modprobe em28xx i2c_scan=1" I get the exact same result as Chris using firmware V3 or V4. tvtime just hangs and mplayer reports "v4l2: select timeout". Let me know if there is something you need done, tested, etc. Erik _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
