On 11/29/06, Federico Quagliata <federico@xxxxxxxxxxxxx> wrote:
Ok, just mail me the scripts once is ready. <g>
Hi Federico,
attached you could find a zip file containing the script, my
channel.conf and the output of the script (I think you just need to
change $tzap path and maybe channels.conf location in the script)
Yeah... I also noticed that problems grows with frequencies.
I've noticed that (at least in this run of the script) that's
not exactly true (not 100% true, but almost) for me:
Summary statistics:
Frequency Signal Ber Unc
========= ====== ======== ========
514000000 a151 00000000 00000001
570000000 96f9 00000000 00000000
794000000 8308 00000000 00000001
818000000 7539 00193640 00000fae
834000000 79b8 00044993 00000bd6
842000000 7b72 00004394 00000009
850000000 79ce 00051580 000023f1
858000000 7843 000694ee 00001d2b
But, as can be depicted from the statistics, there are some
differences between low frequencies and high frequencies (being the
8xxxHz frequencies the worst case, that correspond to the frequencies
of the channels that doesn't work ok for me under linux)
A silly question: is it normal to get so different signal level
for different frequencies (as said, from my window I can see the TV
antenna that is emitting all the channels)?
I can receive with no problems the VHF E-channel (186Mhz freq with 7mhz bandwith).
Sorry.. no idea about VHF or not :-) Anyway, from my
channels.conf maybe you could deduce the parameters of each
channel/frequency
I'm also sure my antenna and cables are fine... They work ok both in Windows+USB Stick and a stand-alone DVB-T set-top-box I have.
That's true for me under windows+Hauppauge driver/mediacenter
ts_parse: PID=###, Transport error: 1, CC_OK: yes
It means that the stream that the mplayer ts demuxer receives is corrupted.
I've run mplayer -v with one of the problematic channels and I
get a lot of the same messages (the output of mplayer -v is also in
the attached zip)
I don't know if any one has some ideas about this...
Hope the script works for you (and sorry about coding style, is
just a q&d script :) )
Best,
Jose
PS. Note that you need a recent tzap, since some versions (I think) do
not fflush after writing to the output the status message, son the
pipe to read from tzap won't work (I experienced this with a FC6
installation, and I don't remember if tzap came from the installation
of was yum-installed from some repository. I've just downloaded the
latest dvb-apps and it works fine)
<<attachment: attach.zip>>
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
