Duncan Thomas wrote: > Hi List > > I wonder if anyone can shed some light on the status of cx88-blackbird and > the HVR-1300 card. Are we able to use this module with the card yet or are > we still using software. > > I see some references in the archives - but it's not clear as to its status. > > I can modprobe the module and I get this in dmesg > > CORE cx88[0]: subsystem: 0070:9600, board: Hauppauge WinTV-HVR1300 > DVB-T/Hybrid MPEG Encoder [card=56] > CORE cx88[1]: subsystem: 0070:9600, board: Hauppauge WinTV-HVR1300 > DVB-T/Hybrid MPEG Encoder [card=56] > cx2388x blackbird driver version 0.0.6 loaded > cx8802_register_driver() ->registering driver type=blackbird access=shared > CORE cx88[0]: subsystem: 0070:9600, board: Hauppauge WinTV-HVR1300 > DVB-T/Hybrid MPEG Encoder [card=56] > cx88[0]/2: cx23416 based mpeg encoder (blackbird reference design) > cx88[0]/2: registered device video2 [mpeg] > CORE cx88[1]: subsystem: 0070:9600, board: Hauppauge WinTV-HVR1300 > DVB-T/Hybrid MPEG Encoder [card=56] > cx88[1]/2: cx23416 based mpeg encoder (blackbird reference design) > cx88[1]/2: registered device video3 [mpeg] > > Mythtv can see the encoder but I get a whole bunch of firmware errors if I > try to use it. > It uses the ivtv encoder firmware, and yes -- it works. The firmware errors that you are probably seeing is most likely due to missing firmware image. see ivtvdriver.org for info on how to get the cx2341x encoder firmware. -- Michael Krufky _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
