Sorry, I did not send it to the mail list.
Suur Karu wrote:
> My Technotrend Connect C-1200 USB DVB-C adapter have problem
> to tunning to 170MHz (no signal at all), but instead of it I found
missing channels on frequency 178MHz (not listed in NIT table), but with
big disturbance in picture and not stable LOCK (not usable).
>
> Other frequencies works flawlessly (162, 498, 506, 570...)
>
> Example of channels.conf file:
> # freq sr fec mod
> C 162000000 6900000 NONE QAM64
> C 170000000 6900000 NONE QAM64
>
> Same receiver on Windows find correct values.
>
> dmesg:
> ttusb_init_controller: unknown STC version V 2.5, please report!
> ttusb_init_controller: dsp-version: 0.0
> DVB: registering new adapter (Technotrend/Hauppauge Nova-USB).
> DVB: registering frontend 1 (ST STV0297 DVB-C)...
> usbcore: registered new driver ttusb
If your device is using the philips tda1316 tuner, i think there is a
problem in setting the correct Band. 162 MHz and above should be band 2
(Mid-Band). But in dvbc_philips_tdm1316l_tuner_set_params band 1 is set
for frequencies below 200 MHz:
// determine charge pump
tuner_frequency = params->frequency;
if (tuner_frequency < 87000000) {return -EINVAL;}
else if (tuner_frequency < 130000000) {cp = 3; band = 1;}
else if (tuner_frequency < 160000000) {cp = 5; band = 1;}
else if (tuner_frequency < 200000000) {cp = 6; band = 1;} <<==
else if (tuner_frequency < 290000000) {cp = 3; band = 2;}
else if (tuner_frequency < 420000000) {cp = 5; band = 2;}
else if (tuner_frequency < 480000000) {cp = 6; band = 2;}
else if (tuner_frequency < 620000000) {cp = 3; band = 4;}
else if (tuner_frequency < 830000000) {cp = 5; band = 4;}
else if (tuner_frequency < 895000000) {cp = 7; band = 4;}
else {return -EINVAL;}
Try to change to 2:
else if (tuner_frequency < 200000000) {cp = 6; band = 2;}
Regards, Thomas
--
http://www.kaiser-linux.li
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb