tomlohave wrote: > tomlohave@xxxxxxxxx a écrit : >> Michael Krufky a écrit : >>> tomlohave wrote: >>> >>>> Hello, >>>> >>>> This small patch enables video over s-video and composite1. >>>> >>>> One question : i 'm unable to test sound via line-in in my card ? >>>> >>> >>> Tom, >>> >>> The .amux value is the "audio mux" -- this might be set incorrectly, >>> if you >>> are not hearing audio. Try and see if LINE1 works, instead. >>> >>> >>> >> Thanks for your answer but i have already tested this setting (line1) >> and same result. [snip] > Do i enable something about gpio ? > > i search in http://perso.wanadoo.fr/tomlohave/hcw713x.inf about gpio and > i found this : > > ;---- SAA7133 ---- > [Hauppauge_33.AddReg] > > ; Prefix will be displayed in front of the device name on every filter > HKR, "Parameters","Prefix",,%Hauppauge_CUSTOM_TUNERNAME% > > ; Reduces second pair of video/audio inputs > HKR, "Parameters","SmallXBar",0x00010001,0x00 > > ; Specify the GPIO pin and polarity for VideoMUX control (Polarity is > the MSB) > HKR, "Parameters","VideoMuxGPIO",0x00010001,0x08 > > ; GPIO Audio Configuration HKR, "Audio", "I2S Output", > 0x00010001,0x00000000 HKR, "Audio", "I2S2 Output", 0x00010001,0x00000000 > > Is this can help me ? (i don't want to break my card, so i'm careful and > prefer ask question before ...) Tom, I have no idea, without having the card in my hands and testing it myself. I cannot guarantee that you can write GPIO to the card without damaging it, although I think it is probably safe. Proceed at your own risk ... If it were me, I would try it. -- Michael Krufky _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
