I've build the drivers from http://linuxtv.org/hg/~pb/v4l-dvb, but the
frontend on the stick is still not recognized - (on FC6) I get:
usb 2-8: new high speed USB device using ehci_hcd and address 20
usb 2-8: configuration #1 chosen from 1 choice
dib0700: loaded with support for 2 different device-types
FW GET_VERSION length: -32
cold: 1
dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to
load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (Hauppauge Nova-T Stick).
I2C read failed on address 9
I2C read failed on address 40
DiB7000P:-D- DiB7000PC not detected
I2C read failed on address 9
DiB7000M:i2c read error on 896
DiB7000M:-E- DiB7000M: wrong Vendor ID (read=0x400d)
dvb-usb: no frontend was attached by 'Hauppauge Nova-T Stick'
dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
usbcore: registered new driver dvb_usb_dib0700
Interesting things here are:
FW GET_VERSION length is returning -32?
I2C reads of 9, 40 and 896 are all failing why ?
This is with a *new* WinTV NOVA-T USB stick.
I've tried plugging it in and out several times (10+) but it makes no
difference.
Any help would be greatfully received.
Steve
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
