Hi,
since the good Andrew forgot once again to commit this patch :) here it
is again:
it permits to select the frontend to use in the Lifeview Trio:
trio_frontend=1 => satellitar
trio_frontend=0 => terrestrial
Signed-off by Nico Sabbi (nsabbi@xxxxxxxxxx)
--- saa7134-dvb.c.orig 2006-07-30 12:08:06.000000000 +0200
+++ saa7134-dvb.c 2006-07-30 22:17:14.000000000 +0200
@@ -51,6 +51,10 @@
module_param(antenna_pwr, int, 0444);
MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
+static int trio_frontend = 0;
+module_param(trio_frontend, int, 0644);
+MODULE_PARM_DESC(trio_frontend,"frontend to enable in the Lifeview Trio card (0: terrestrial, 1: satellitar)");
+
/* ------------------------------------------------------------------ */
static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on)
{
@@ -1154,12 +1158,24 @@
}
break;
case SAA7134_BOARD_FLYDVB_TRIO:
+ if(! trio_frontend) { //terrestrial
dev->dvb.frontend = dvb_attach(tda10046_attach, &lifeview_trio_config,
&dev->i2c_adap);
if (dev->dvb.frontend) {
dev->dvb.frontend->ops.tuner_ops.sleep = lifeview_trio_tuner_sleep;
dev->dvb.frontend->ops.tuner_ops.set_params = lifeview_trio_tuner_set_params;
}
+ } else { //satellitar
+ dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
+ if (dev->dvb.frontend) {
+ if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63, &dev->i2c_adap, 0) == NULL) {
+ printk("%s: Lifeview Trio, No tda826x found!\n", __FUNCTION__);
+ }
+ if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap, 0x08, 0, 0) == NULL) {
+ printk("%s: Lifeview Trio, No ISL6421 found!\n", __FUNCTION__);
+ }
+ }
+ }
break;
case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
dev->dvb.frontend = dvb_attach(tda10046_attach, &ads_tech_duo_config,
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
