hi, i think there is a version of kaffeine with broken scan function, so if you have the /dev/dvb/??? better try tzap and than convert the tzap channel file to kaffeine, search the google for a script. or use xine, mirsha On Monday, 13. November 2006 11:04, Peter Weber wrote: > hi, > > is this USB device supported? > lsusb says: > Bus 005 Device 002: ID 15f4:0001 HanfTek HanfTek UMT-010 USB2.0 DVB-T > (cold) > > after loading the Hanftek firmware: > Bus 001 Device 008: ID 15f4:0015 HanfTek > > /proc/bus/usb/devices > .... > T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=15f4 ProdID=0015 Rev= 0.01 > S: Manufacturer=UMT-010 V00.01 > S: Product=HANF FIRMWARE > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA > I: If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > > lsmod |grep dvb > dvb_usb_umt_010 5760 1 > dvb_usb_dibusb_common 6788 1 dvb_usb_umt_010 > dib3000mc 14848 1 dvb_usb_dibusb_common > dvb_usb 16264 2 dvb_usb_umt_010,dvb_usb_dibusb_common > dvb_core 70568 1 dvb_usb > dvb_pll 13060 3 > dvb_usb_umt_010,dvb_usb_dibusb_common,dvb_usb mt352 6916 > 1 dvb_usb_umt_010 > i2c_core 17792 6 > dvb_usb,dvb_pll,mt352,i2c_ec,dib3000_common,i2c_i801 usbcore > 107908 9 > dvb_usb_umt_010,dvb_usb,usb_storage,libusual,usbhid,usbkbd,uhci_hcd,ehci_hc >d > > > kaffeine accepting the device as Zarlink MT352 > but channelscan find no channels. > > winxp says, it's a C&E device > the device works fine under win, hardware o.k. > > thx > Horst -- SHALTEV.ORG @ http://www.shaltev.org _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
