I've just bought a Hauppauge WinTV-Nova-T from ebuyer in the UK. The board revision is 90003LF and the visible chips a Conexant CX23882-39 and CX22702-25. I'm running Fedora Core 5 and have removed the blackbird modules as suggested by Paul Netherwoood. I've created a configuration file for my transmitter below and used scan and w_scan to look for channels and am getting the outputs shown edited below. The aerial works fine into a Goodmans GDB2. Any ideas? Thanks Bill # Aberdare # Mux 1 +167kHz ERP 0.05kW Ch 28 530 MHz (530167000) 16QAM # Mux 2 +167kHz ERP 0.05kW Ch 32 562 MHz (562167000) 64QAM # Mux A -167kHz ERP 0.1kW Ch 23 490 MHz (489833000) 16QAM # Mux B -167kHz ERP 0.1kW Ch 26 514 MHz (513833000) 16QAM # Mux C +167kHz ERP 0.1kW Ch 29 538 MHz (538167000) 16QAM # Mux D +167kHz ERP 0.1kW Ch 33 570 MHz (570167000) 16QAM # T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy T 530167000 8MHz 3/4 NONE QAM16 2k 1/32 NONE T 562167000 8MHz 2/3 NONE QAM64 2k 1/32 NONE T 489833000 8MHz 3/4 NONE QAM16 2k 1/32 NONE T 513833000 8MHz 3/4 NONE QAM16 2k 1/32 NONE T 538167000 8MHz 3/4 NONE QAM16 2k 1/32 NONE T 570167000 8MHz 3/4 NONE QAM16 2k 1/32 NONE 490000: signal ok (I999B8C999D999M999T999G999Y999) 498000: 506000: 514000: signal ok (I999B8C999D999M999T999G999Y999) 522000: 530000: signal ok (I999B8C999D999M999T999G999Y999) 538000: signal ok (I999B8C999D999M999T999G999Y999) 546000: 554000: 562000: signal ok (I999B8C999D999M999T999G999Y999) 570000: signal ok (I999B8C999D999M999T999G999Y999) 578000: tune to: :490000:I999B8C999D999M999T999G999Y999:T:27500: Info: filter timeout pid 0x0011 Info: filter timeout pid 0x0000 Info: filter timeout pid 0x0010 tune to: :514000:I999B8C999D999M999T999G999Y999:T:27500: Info: filter timeout pid 0x0011 Info: filter timeout pid 0x0000 Info: filter timeout pid 0x0010 tune to: :530000:I999B8C999D999M999T999G999Y999:T:27500: Info: filter timeout pid 0x0011 Info: filter timeout pid 0x0000 Info: filter timeout pid 0x0010 tune to: :538000:I999B8C999D999M999T999G999Y999:T:27500: Info: filter timeout pid 0x0011 Info: filter timeout pid 0x0000 Info: filter timeout pid 0x0010 tune to: :562000:I999B8C999D999M999T999G999Y999:T:27500: Info: filter timeout pid 0x0011 Info: filter timeout pid 0x0000 Info: filter timeout pid 0x0010 tune to: :570000:I999B8C999D999M999T999G999Y999:T:27500: Info: filter timeout pid 0x0011 Info: filter timeout pid 0x0000 Info: filter timeout pid 0x0010 dumping lists (0 services) Done. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
