Antti Palosaari wrote: > Hi, > This patch adds driver for Sigmatek DVB-110 USB DVB-T stick. Stick has > based on hardware of Qtuantek QT1010 tuner, Zarlink ZL10353 (Intel CE > 6353) demodulator and Alcor Micro AU6610 DVB-T USB controller. HW is > rather similar as used in MSI Megasky GL861. > > Currently, the driver works only in USB 2.0. In my understanding USB 1.1 > is also supported by hw but I cannot test it due to lack of USB 1.1 > port. Device supports only isochronous mode transfers. There is also > eeprom in usb-controller (at least in address range 0x80 - 0xbf) for > storing data, eg. firmware. Anyway, firmware loading is not used / > required by the device. > > There seems to be at least one unknown I2C device in address 0xa0, > probably remote control or GPIO. Windows drivers reads registers from > 0x00 to 0x07 from this unknown address. > > Driver is based on gl861 module in current megasky development tree. > Tuner has a lot of problems to lock with megasky qt1010 module with this > hardware at least broadcasting standards used in Finland. I will try to > fix this later... > > Feedback, bug/success reports are highly welcome. > > Best regards > Antti Palosaari Antti, Please provide a sign-off for your patch, as described in README.patches and README.HG, in the top level directory of the mercurial repository. Regards, Michael Krufky _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
