Michael Krufky a écrit :
tomlohave@xxxxxxxxx wrote:
Michael Krufky a écrit :
tomlohave wrote:
signed-off-by Thomas Genty <tomlohave@xxxxxxxxx>
I hope this one is good :p (try 3, the last ?)
There is still some stray newline changes,
see attachment.
but I am not going to make
you resubmit the patch -- this is good enough.
If neither Hartmut, Andrew or Steve have any problems with this (patch
located @
http://www.linuxtv.org/pipermail/linux-dvb/attachments/20061103/887d3b72/patch-hvr1110-try3.bin
), or if they do not apply it themselves by the time I get home
tomorrow, then I will push it into my repository.
Good work, Tom!
Thanks for your patience
Regards,
Tom
Regards,
Michael Krufky
diff -ur v4l-dvb/linux/drivers/media/video/saa7134/saa7134-cards.c v4l-dvb-hvr1110/linux/drivers/media/video/saa7134/saa7134-cards.c
--- v4l-dvb/linux/drivers/media/video/saa7134/saa7134-cards.c 2006-11-03 14:49:23.000000000 +0100
+++ v4l-dvb-hvr1110/linux/drivers/media/video/saa7134/saa7134-cards.c 2006-11-03 23:04:27.000000000 +0100
@@ -3166,6 +3166,28 @@
.amux = LINE2,
}},
},
+ [SAA7134_BOARD_HAUPPAUGE_HVR1110] = {
+ /* Thomas Genty <tomlohave@xxxxxxxxx> */
+ .name = "Hauppauge WinTV-HVR1110 DVB-T/Hybrid",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
+ .gpiomask = 0x000200000,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ }},
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x0200000,
+ },
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -3793,6 +3815,12 @@
.subdevice = 0x4876,
.driver_data = SAA7134_BOARD_ASUSTeK_P7131_DUAL,
},{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x0070,
+ .subdevice = 0x6701,
+ .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110,
+ },{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -3995,6 +4023,9 @@
case SAA7134_BOARD_PINNACLE_PCTV_110i:
case SAA7134_BOARD_PINNACLE_PCTV_310i:
case SAA7134_BOARD_UPMOST_PURPLE_TV:
+#if 0
+ case SAA7134_BOARD_HAUPPAUGE_HVR1110:
+#endif
dev->has_remote = SAA7134_REMOTE_I2C;
break;
case SAA7134_BOARD_AVERMEDIA_A169_B:
@@ -4129,6 +4160,7 @@
case SAA7134_BOARD_TEVION_DVBT_220RF:
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
case SAA7134_BOARD_MEDION_MD8800_QUADRO:
+ case SAA7134_BOARD_HAUPPAUGE_HVR1110:
/* this is a hybrid board, initialize to analog mode
* and configure firmware eeprom address
*/
diff -ur v4l-dvb/linux/drivers/media/video/saa7134/saa7134-dvb.c v4l-dvb-hvr1110/linux/drivers/media/video/saa7134/saa7134-dvb.c
--- v4l-dvb/linux/drivers/media/video/saa7134/saa7134-dvb.c 2006-11-03 14:49:23.000000000 +0100
+++ v4l-dvb-hvr1110/linux/drivers/media/video/saa7134/saa7134-dvb.c 2006-11-03 15:28:50.000000000 +0100
@@ -900,6 +900,17 @@
};
/* ------------------------------------------------------------------ */
+static struct tda1004x_config hauppauge_hvr_1110_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .if_freq = TDA10046_FREQ_045,
+ .request_firmware = philips_tda1004x_request_firmware,
+};
+
+/* ------------------------------------------------------------------ */
static struct tda1004x_config asus_p7131_dual_config = {
.demod_address = 0x08,
@@ -1222,6 +1233,17 @@
dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
}
break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1110:
+ dev->dvb.frontend = dvb_attach(tda10046_attach,
+ &hauppauge_hvr_1110_config,
+ &dev->i2c_adap);
+ if (dev->dvb.frontend) {
+ dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
+ dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init;
+ dev->dvb.frontend->ops.tuner_ops.sleep = philips_tiger_tuner_sleep;
+ dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
+ }
+ break;
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
dev->dvb.frontend = dvb_attach(tda10046_attach,
&asus_p7131_dual_config,
diff -ur v4l-dvb/linux/drivers/media/video/saa7134/saa7134.h v4l-dvb-hvr1110/linux/drivers/media/video/saa7134/saa7134.h
--- v4l-dvb/linux/drivers/media/video/saa7134/saa7134.h 2006-11-03 14:49:23.000000000 +0100
+++ v4l-dvb-hvr1110/linux/drivers/media/video/saa7134/saa7134.h 2006-11-03 15:31:48.000000000 +0100
@@ -239,6 +239,7 @@
#define SAA7134_BOARD_PINNACLE_PCTV_310i 101
#define SAA7134_BOARD_AVERMEDIA_STUDIO_507 102
#define SAA7134_BOARD_VIDEOMATE_DVBT_200A 103
+#define SAA7134_BOARD_HAUPPAUGE_HVR1110 104
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
diff -ur v4l-dvb/linux/drivers/media/video/saa7134/saa7134-input.c v4l-dvb-hvr1110/linux/drivers/media/video/saa7134/saa7134-input.c
--- v4l-dvb/linux/drivers/media/video/saa7134/saa7134-input.c 2006-11-03 14:49:23.000000000 +0100
+++ v4l-dvb-hvr1110/linux/drivers/media/video/saa7134/saa7134-input.c 2006-11-03 22:53:21.000000000 +0100
@@ -349,6 +349,13 @@
ir->get_key = get_key_purpletv;
ir->ir_codes = ir_codes_purpletv;
break;
+#if 0
+ case SAA7134_BOARD_HAUPPAUGE_HVR1110:
+ snprintf(ir->c.name, sizeof(ir->c.name), "HVR 1110");
+ ir->get_key = get_key_purpletv;
+ ir->ir_codes = ir_codes_purpletv;
+ break;
+#endif
default:
dprintk("Shouldn't get here: Unknown board %x for I2C IR?\n",dev->board);
break;
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
