hi @ all
i am not sure, if this questions belong here, so if not sorry @ all,
i have a videa dtv-100 usb 2.0 dvb-t box (www.videa-teach.com),
if used under windows and not discontected before linux boot:
lsusb:
Bus 003 Device 002: ID 046d:c001 Logitech, Inc. N48/M-BB48 [FirstMouse Plus]
Bus 003 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 003: ID 15f4:0024 HanfTek
Bus 005 Device 002: ID 04cc:1122 Philips Semiconductors Hub
Bus 005 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
if dis- and reconnect , than lsusb:
Bus 003 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 005: ID 167e:0100
Bus 001 Device 001: ID 0000:0000
Bus 005 Device 002: ID 04cc:1122 Philips Semiconductors Hub
Bus 005 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
i tried to load:
mt352.ko
dvb-usb.ko
dvb-usb-dibusb-common.ko
dvb-usb-umt-010.ko
but /dev/dvb blah,, blah was not created (if i load the modules for my dvb-s
card , twinhan, the dev files appears, and dvb-s works)
any ideas?
thank you!
mirsha
p.s.1 i send an email to videa support, but no answer so far :(
p.s.2 some box specifications:
COFDM & FEC {
Fully DVB-T Compliant
2K or 8K FFT Size
Punctured Codes: 1/2, 2/3, 3/4, 4/5, 5/6 and 7/8
Bandwidth: 6/7/8 MHz Auto Select
}
Demultiplexing: {
Max No. Section filtering: 32PIDs
Engine: Hardware
Stream capture: PES & TS
}
A/V Format {
Video format: MPEG-II Main Profile & Main Level
Audio format: MPEG-II Audio layer I & II
}
Modulation {
QPSK, 16QAM or 64QAM
}
--
SHALTEV.ORG @ http://www.shaltev.org
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
