Problem - i2c read error on 896 (was Dib7000m-driver released)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tomi Koivulahti wrote:
On 10/17/06, *Patrick Boettcher* <patrick.boettcher@xxxxxxx <mailto:patrick.boettcher@xxxxxxx>> wrote:

    Hi,

    in my repository (http://linuxtv.org/hg/~pb/v4l-dvb
    <http://linuxtv.org/hg/%7Epb/v4l-dvb>) I just committed a
    first working version of the dib7000m/p-driver along with some
    modifications in the dib0700-driver.

    I tested with a first generation Nova-T stick - it works (AverMedia is
    identical). There is a chance that someone has the newer version
    of those
    devices - it contains a different version of the DiB7000 - I will
    try to
    release this one as soon as possible.

    Please load the dib7000m-driver with debug=1 in case it does not
    work and
    reply to this Email but change the subject (like: "Problem (was:
    DiB7000M
    ...") - success reports (Yes I want them as well) can be replied
    without
    changing the subject.

    good luck,
    Patrick.

    --
      Mail: patrick.boettcher@xxxxxxx <mailto:patrick.boettcher@xxxxxxx>
      WWW:  http://www.wi-bw.tfh-wildau.de/~pboettch/
    <http://www.wi-bw.tfh-wildau.de/%7Epboettch/>

    _______________________________________________
    linux-dvb mailing list
    linux-dvb@xxxxxxxxxxx <mailto:linux-dvb@xxxxxxxxxxx>
    http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb



Hello Patrick,

I've just tried the driver on 2.6.18. I get the following:

dib0700: loaded with support for 2 different device-types
dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-T Stick).
DiB7000M:i2c read error on 896
DiB7000M:-E-  DiB7000M: wrong Vendor ID (read=0x4602)
dvb-usb: no frontend was attached by 'Hauppauge Nova-T Stick'
dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
usbcore: registered new driver dvb_usb_dib0700

Steve.


_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux