2006/10/25, Calum <caluml@xxxxxxxxx>:
yes but with this settings, no remote control and no analogic tv (when you enabled tuner with debug=1, no lock).
So i wrote a small definition for this card (based on 310i) and i search for more informations to get remote controle and analogic tv work.
i have not tested input via s-video neither the radio device.
PS : Sorry for my bad english.
Tom
Hello all
I have managed to get the HVR1110 working, with help from people on
#v4l, as well as a nice chap called John via email.
He said that it worked with the saa3174 driver.
I have it working in DVB-T (haven't tried analogue though) with the following:
kernel: 2.6.17.13 (with dvb/v4l stuff compiled as modules)
v4l-dvb: Latest (as of 2006-10-24)
modprobe -v saa3174 card=101
modprobe -v saa3174_dvb
yes but with this settings, no remote control and no analogic tv (when you enabled tuner with debug=1, no lock).
So i wrote a small definition for this card (based on 310i) and i search for more informations to get remote controle and analogic tv work.
i have not tested input via s-video neither the radio device.
dmesg for me shows:
# dmesg | grep saa71
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:00:06.0, rev: 209, irq: 20, latency: 32,
mmio: 0xcefee800
saa7133[0]: subsystem: 0070:6701, board: Pinnacle PCTV 310i
[card=101,insmod option]
saa7133[0]: board init: gpio is 6400000
saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
saa7133[0]: i2c scan: found device @ 0x10 [???]
saa7133[0]: i2c scan: found device @ 0x96 [???]
saa7133[0]: i2c scan: found device @ 0xa0 [eeprom]
saa7133[0]: i2c scan: found device @ 0xe0 [???]
saa7133[0]: i2c scan: found device @ 0xe2 [???]
saa7133[0]: i2c scan: found device @ 0xe4 [???]
saa7133[0]: i2c scan: found device @ 0xe6 [???]
tuner 0-004b: chip found @ 0x96 (saa7133[0])
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
DVB: registering new adapter (saa7133[0]).
And from there, you can use dvbscan/mplayer as normal.
Calum
PS : Sorry for my bad english.
Tom
--
bash# Got root? Get root. Fast IPv4+6 Linux VPS
http://linuxvps.org/
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb