Ah I'll dig them out and give them a whirl let you know Thank you On Thu, 2006-10-19 at 16:13 -0400, Michael Krufky wrote: > Malcolm Caldwell wrote: > > On Wed, 2006-10-18 at 22:40 +0100, Andrew Waldram wrote: > >> As I couldn't find the post thought I'd better link it here ;-) > >> > >> http://www.linuxtv.org/pipermail/linux-dvb/2006-October/013572.html > >> > >> shows the error I get when trying to tune > > > > I get the same errors. I believe they are due to the frequencies in UK > > and Australian being offset from the centre frequency. The qt1010.h > > file seems to have been hardcoded that the frequency must be divisible > > by 2000000. > > Andrew Waldram wrote: > > > Yet as far as I am able to see once the driver is compiled it will > > > install but is not able to tune (previous post gives details.) > > > > > > I have seen 2 reports of this on the net and also reported that in this > > > group. > > > > > > If I have done something daft could you point me in the right direction. > > > > > > I compiled just from your HG tree. > > The problem is not in the megasky m920x / gl861 driver itself -- rather, > the qt1010 code is not complete. There are some pending patches on the > linux-dvb list that you should feel welcome to try. I have not applied > these yet, because I am unsure as to whether or not they are appropriate. > > --Mike _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
