I recently replaced my Asus A8N-Sli deluxe board with a Gigabyte GA-965p-DS3 board with a Duo 2 Core 6300 (965P + ICH8). I used the same kernel and OS as I was using before (Debian Ubuntu Edgy Eft 2.6.17-10). Two things broke (and I am not sure why). LM sensors and ATSC half (!!) of the PCHDTV card shows up. (This is the same kerrnel and setup as I was running before. I also built a new kernel to see if that would fix things). The NTSC functionality works fine. The system is running Ubuntu Edgy Eft. dmesg | grep -i cx [ 20.632345] cx2388x v4l2 driver version 0.0.6 loaded [ 20.632416] CORE cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected] [ 20.788941] cx88[0]/0: found at 0000:05:00.0, rev: 5, irq: 21, latency: 32, mmio: 0xf0000000 [ 20.807367] tuner 0-0043: chip found @ 0x86 (cx88[0]) [ 20.810505] tuner 0-0061: chip found @ 0xc2 (cx88[0]) [ 20.824072] cx88[0]/0: registered device video0 [v4l2] [ 20.824093] cx88[0]/0: registered device vbi0 [ 20.824108] cx88[0]/0: registered device radio0 If I try to manually insert the cx88-dvb module I get: [ 2037.545219] cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded [ 2037.548752] cx2388x dvb driver version 0.0.6 loaded [ 2037.548757] cx8802_register_driver() ->registering driver type=dvb access=shared No cx88-dvb is loaded. When I try to load it: mediacore:~> sudo /sbin/modprobe cx88-dvb FATAL: Error inserting cx88_dvb (/lib/modules/2.6.19-rc1-mm1conroe/kernel/drivers/media/video/cx88/cx88-dvb.ko): No such device I have tried using the head version of DVB, and updating the kernel to the newest -mm patch, with no luck at all. Any ideas on how to debug this or fix this problem? _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
