From: Jan Nijs <jan.nijs@xxxxxxxxxx> This patch fixes the tuning issue I was having. Tuning to 482MHz was impossible. Now this driver works as expected for me. I also removed a line that set the tuner access gate to disabled (register 0x62), while a few writes later it is re-enabled. This doesn't impact the correct working of the driver for me. Carl, do you confirm that these changes don't have any impact when you use the driver on another frequency? I can only test 482MHz as this is the only channel in my neighborhood. Signed-off-by: Jan Nijs <jan.nijs@xxxxxxxxxx> --- diff -uNrp megasky/linux/drivers/media/dvb/frontends/qt1010.h megasky-temp/linux/drivers/media/dvb/frontends/qt1010.h --- megasky/linux/drivers/media/dvb/frontends/qt1010.h 2006-10-07 00:28:54.000000000 +0200 +++ megasky-temp/linux/drivers/media/dvb/frontends/qt1010.h 2006-10-09 23:38:55.000000000 +0200 @@ -150,6 +150,8 @@ static int qt1010_set_params(struct dvb_ rd[15].value = 0xd0; else if (div < 217) rd[15].value = 0xd3; + else if (div == 217) + rd[15].value = 0xd4; else if (div < 233) rd[15].value = 0xd6; else if (div < 249) diff -uNrp megasky/linux/drivers/media/dvb/frontends/zl10353.c megasky-temp/linux/drivers/media/dvb/frontends/zl10353.c --- megasky/linux/drivers/media/dvb/frontends/zl10353.c 2006-10-07 00:18:01.000000000 +0200 +++ megasky-temp/linux/drivers/media/dvb/frontends/zl10353.c 2006-10-09 23:47:45.000000000 +0200 @@ -146,9 +146,9 @@ static int zl10353_set_parameters(struct zl10353_single_write(fe, 0x66, 0xE9); zl10353_single_write(fe, 0x6C, 0xCD); zl10353_single_write(fe, 0x6D, 0x7E); - zl10353_single_write(fe, 0x62, 0x0A); zl10353_single_write(fe, 0x65, 0x67); + zl10353_single_write(fe, 0x5a, 0x0c); zl10353_single_write(fe, 0x62, 0x1A); // if there is no attached secondary tuner, we call set_params to program _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
