Hi, Following on from suggestions by Michael Krufky in this list, I've managed to get this tuner card working (thanks Mike!), almost perfectly. The only problem now is that the remote isn't working. The drivers appear to be loading correctly, so that the entries appear in /proc/bus/input/devices and both /dev/input/event0 and event1 are created. However, nothing appears under 'cat /dev/input/event[0|1]' when I press the buttons. I've tried it under a windows partition, and it works there, so it's not the hardware. irrecord doesn't pick up anything either (as you'd expect) when trying 'lircd -H dev/input -d /dev/input/event[0|1]'. Please help! I really don't want to use windows just to be able to use the remote! On another note, does anyone know how to change IRQ priorities? The wireless card has been given a lower IRQ (even after physically swapping slots), and the BIOS won't help. Network traffic causes glitches :( Thanks, Nathan Webb _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
