Hi, Am Montag, den 25.09.2006, 15:10 +0200 schrieb Eddi: > I've a Lifeview FlyDvb Trio and i'd like to make the remote working, so I > followed instruction on > http://www.linuxtv.org/v4lwiki/index.php?title=Remote_controllers to setup a > new remote, but when pressing buttons, data never change. > > Any suggestion? I don't have the card, but from prior investigations on it I know there is no specific IR chip on the card. This is similar like the situation on the asus p7131 dual. (uses also the same chip for antenna input switching) You should have at least keydown/up connected to a gpio pin of the saa7131e, likely 16 or 18. 18 (0x040000) is connected for that at least on the older version of the asus card. In that case it might be worth to experiment with the remote patch of the asus p7131 dual like just mentioned and linked in my previous mail. http://www.spinics.net/lists/vfl/msg28261.html Good Luck, Hermann _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
