> DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM > Frontend)... > > This seems to match my actual device which is the "FusionHDTV 5 RT > Gold". I had read that the "FusionHDTV5 RT Gold" and the "FusionHDTV5 > Gold Plus" were actually identical boards. The chips seemed to match > up with the modules and the dvb-v4l tables I've seen. > > 04:02.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and > Audio Decoder [MPEG Port] (rev 05) > Subsystem: DViCO Corporation DViCO FusionHDTV5 Gold > Flags: bus master, medium devsel, latency 32, IRQ 7 > Memory at fd000000 (32-bit, non-prefetchable) [size=16M] in my case, a DViCO FusionHDTV DVB-T1 was being set to a FusionHDTV DVB-T-Plus - and these were sufficiently different.... if you're physically looking at the PCI card, maybe check that the frontend is indeed a LG LGDT3303... cheers, lincoln. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
