Hi all,
I am now testing a DVB-T system on a STB. The hardware configurations
are:
SAA7130 + TDA10046 + TD1316
I used a DVB-T modulator to generate DVB-T signals (with a 4MBit bitrate
TS stream, single programme).
But when I use "tzap" to lock the corresponding frequency (only one
single frequency available on the transmission line, which is only 1
meter long), the screen dump are:
< snip. >
status 1f | signal afaf | snr ffff | ber 0000004e | unc 00000000 |
FE_HAS_LOCK
status 1f | signal afaf | snr ffff | ber 0000004a | unc 00000000 |
FE_HAS_LOCK
status 1f | signal afaf | snr ffff | ber 0000004c | unc 00000000 |
FE_HAS_LOCK
status 1f | signal afaf | snr ffff | ber 0000004c | unc 00000000 |
FE_HAS_LOCK
status 1f | signal afaf | snr ffff | ber 00000040 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal afaf | snr ffff | ber 00000040 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal afaf | snr ffff | ber 0000004c | unc 00000000 |
FE_HAS_LOCK
status 1f | signal afaf | snr ffff | ber 00000040 | unc 00000000 |
FE_HAS_LOCK
< snip. >
The "ber" field is quite strange, I do not know are there any users
notice these status responses? Should the "ber" field is zero for a good
signal?
And any other abnormal state shown on the above screen dump? Please
help.
Thanks.
Best regards,
Lo Chun Chung
This message (including any attachments) is for the named addressee(s)'s use only. It may contain
sensitive, confidential, private proprietary or legally privileged information intended for a
specific individual and purpose, and is protected by law. If you are not the intended recipient,
please immediately delete it and all copies of it from your system, destroy any hard copies of it
and notify the sender. Any use, disclosure, copying, or distribution of this message and/or any
attachments is strictly prohibited.
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
