Hi, Please find the dmesg message at boot: Regards, Sylvain [17179569.184000] Linux version 2.6.15-26-686 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Fri Sep 8 20:16:40 UTC 2006 [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [17179569.184000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) [17179569.184000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000007fe90000 (usable) [17179569.184000] BIOS-e820: 000000007fe90000 - 000000007fe9a000 (ACPI data) [17179569.184000] BIOS-e820: 000000007fe9a000 - 000000007ff00000 (ACPI NVS) [17179569.184000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [17179569.184000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [17179569.184000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [17179569.184000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [17179569.184000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [17179569.184000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [17179569.184000] 1150MB HIGHMEM available. [17179569.184000] 896MB LOWMEM available. [17179569.184000] found SMP MP-table at 000f6390 [17179569.184000] On node 0 totalpages: 523920 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] DMA32 zone: 0 pages, LIFO batch:0 [17179569.184000] Normal zone: 225280 pages, LIFO batch:31 [17179569.184000] HighMem zone: 294544 pages, LIFO batch:31 [17179569.184000] DMI present. [17179569.184000] ACPI: RSDP (v000 TOSINV ) @ 0x000f62c0 [17179569.184000] ACPI: RSDT (v001 TOSINV Capell00 0x06040000 LTP 0x00000000) @ 0x7fe92175 [17179569.184000] ACPI: FADT (v001 TOSINV CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe99e20 [17179569.184000] ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe99e94 [17179569.184000] ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe99efc [17179569.184000] ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe99f34 [17179569.184000] ACPI: MADT (v001 TOSINV APIC 0x06040000 LTP 0x00000000) @ 0x7fe99f70 [17179569.184000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7fe99fd8 [17179569.184000] ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050624) @ 0x7fe9321f [17179569.184000] ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050624) @ 0x7fe92b8d [17179569.184000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x7fe921bd [17179569.184000] ACPI: DSDT (v001 TOSINV CALISTGA 0x06040000 INTL 0x20050624) @ 0x00000000 [17179569.184000] ACPI: PM-Timer IO Port: 0x1008 [17179569.184000] ACPI: Local APIC address 0xfee00000 [17179569.184000] ACPI: 2 duplicate APIC table ignored. [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [17179569.184000] Processor #0 6:14 APIC version 20 [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [17179569.184000] Processor #1 6:14 APIC version 20 [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [17179569.184000] IOAPIC[0]: apic_id 1 already used, trying 2 [17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [17179569.184000] ACPI: IRQ0 used by override. [17179569.184000] ACPI: IRQ2 used by override. [17179569.184000] ACPI: IRQ9 used by override. [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs [17179569.184000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [17179569.184000] Using ACPI (MADT) for SMP configuration information [17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/sdb1 ro quiet splash [17179569.184000] mapped APIC to ffffd000 (fee00000) [17179569.184000] mapped IOAPIC to ffffc000 (fec00000) [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes) [17179569.184000] Console: colour VGA+ 80x25 [17179569.184000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [17179569.184000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[17179569.184000] Memory: 2064640k/2095680k available (2115k kernel code, 29852k reserved, 595k data, 332k init, 1178176k highmem) [17179569.184000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179569.184000] hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0 [17179569.184000] hpet0: 3 64-bit timers, 14318180 Hz [17179569.184000] Using HPET for base-timer [17179569.184000] Using HPET for gettimeofday [17179569.184000] Detected 2161.297 MHz processor. [17179569.184000] Using hpet for high-res timesource [17179569.268000] Calibrating delay using timer specific routine.. 4328.48 BogoMIPS (lpj=8656971) [17179569.268000] Security Framework v1.0.0 initialized [17179569.268000] SELinux: Disabled at boot. [17179569.268000] Mount-cache hash table entries: 512 [17179569.268000] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000 [17179569.268000] CPU: After vendor identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000 [17179569.268000] monitor/mwait feature present. [17179569.268000] using mwait in idle threads. [17179569.268000] CPU: L1 I cache: 32K, L1 D cache: 32K [17179569.268000] CPU: L2 cache: 2048K [17179569.268000] CPU: Hyper-Threading is disabled [17179569.268000] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00000040 0000c1a9 00000000 00000000 [17179569.268000] mtrr: v2.0 (20020519) [17179569.268000] Enabling fast FPU save and restore... done. [17179569.268000] Enabling unmasked SIMD FPU exception support... done. [17179569.268000] Checking 'hlt' instruction... OK. [17179569.284000] SMP alternatives: switching to UP code [17179569.284000] checking if image is initramfs... it is [17179570.280000] Freeing initrd memory: 6809k freed [17179570.300000] ACPI: Looking for DSDT ... not found! [17179570.332000] CPU0: Intel Genuine Intel(R) CPU T2600 @ 2.16GHz stepping 08 [17179570.332000] SMP alternatives: switching to SMP code [17179570.332000] Booting processor 1/1 eip 3000 [17179570.344000] Initializing CPU#1 [17179570.424000] Calibrating delay using timer specific routine.. 4322.60 BogoMIPS (lpj=8645206) [17179570.424000] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000 [17179570.424000] CPU: After vendor identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000 [17179570.424000] monitor/mwait feature present. [17179570.424000] CPU: L1 I cache: 32K, L1 D cache: 32K [17179570.424000] CPU: L2 cache: 2048K [17179570.424000] CPU: Hyper-Threading is disabled [17179570.424000] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00000040 0000c1a9 00000000 00000000 [17179570.424000] CPU1: Intel Genuine Intel(R) CPU T2600 @ 2.16GHz stepping 08 [17179570.424000] Total of 2 processors activated (8651.08 BogoMIPS). [17179570.424000] ENABLING IO-APIC IRQs [17179570.424000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [17179570.576000] checking TSC synchronization across 2 CPUs: passed. [17179570.580000] Brought up 2 CPUs [17179570.580000] NET: Registered protocol family 16 [17179570.580000] EISA bus registered [17179570.580000] ACPI: bus type pci registered [17179570.596000] PCI: PCI BIOS revision 2.10 entry at 0xfd6f3, last bus=9 [17179570.596000] PCI: Using MMCONFIG [17179570.596000] ACPI: Subsystem revision 20051216 [17179570.608000] ACPI: Interpreter enabled [17179570.608000] ACPI: Using IOAPIC for interrupt routing [17179570.612000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179570.612000] PCI: Probing PCI hardware (bus 00) [17179570.616000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 [17179570.616000] Boot video device is 0000:01:00.0 [17179570.616000] PCI: Transparent bridge - 0000:00:1e.0 [17179570.616000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179570.624000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [17179570.624000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [17179570.624000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [17179570.624000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [17179570.624000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [17179570.628000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [17179570.628000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [17179570.628000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15) [17179570.632000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [17179570.632000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [17179570.632000] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [17179570.632000] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [17179570.632000] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [17179570.632000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) [17179570.632000] ACPI: Embedded Controller [EC0] (gpe 22) interrupt mode. [17179570.640000] ACPI: Power Resource [FN00] (off) [17179570.640000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179570.640000] pnp: PnP ACPI init [17179570.668000] pnp: PnP ACPI: found 15 devices [17179570.668000] PnPBIOS: Disabled by ACPI PNP [17179570.668000] PCI: Using ACPI for IRQ routing [17179570.668000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179570.712000] PCI: Failed to allocate mem resource #6:20000@c0000000 for 0000:01:00.0 [17179570.712000] PCI: Bridge: 0000:00:01.0 [17179570.712000] IO window: 2000-2fff [17179570.712000] MEM window: d0000000-d1ffffff [17179570.712000] PREFETCH window: b0000000-bfffffff [17179570.712000] PCI: Bridge: 0000:00:1c.0 [17179570.712000] IO window: 3000-3fff [17179570.712000] MEM window: cc000000-cdffffff [17179570.712000] PREFETCH window: c4000000-c5ffffff [17179570.712000] PCI: Bridge: 0000:00:1c.1 [17179570.712000] IO window: 4000-4fff [17179570.712000] MEM window: c8000000-c9ffffff [17179570.712000] PREFETCH window: c0000000-c1ffffff [17179570.712000] PCI: Bridge: 0000:00:1c.2 [17179570.712000] IO window: 5000-5fff [17179570.712000] MEM window: ca000000-cbffffff [17179570.712000] PREFETCH window: c2000000-c3ffffff [17179570.712000] PCI: Bridge: 0000:00:1c.3 [17179570.712000] IO window: 6000-6fff [17179570.712000] MEM window: ce000000-cfffffff [17179570.712000] PREFETCH window: c6000000-c7ffffff [17179570.712000] PCI: Bus 10, cardbus bridge: 0000:09:06.0 [17179570.712000] IO window: 00007000-000070ff [17179570.712000] IO window: 00007400-000074ff [17179570.712000] PREFETCH window: 88000000-89ffffff [17179570.712000] MEM window: 8a000000-8bffffff [17179570.712000] PCI: Bridge: 0000:00:1e.0 [17179570.712000] IO window: 7000-7fff [17179570.712000] MEM window: d2000000-d20fffff [17179570.712000] PREFETCH window: 88000000-89ffffff [17179570.712000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179570.712000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [17179570.712000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177 [17179570.712000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [17179570.712000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 169 [17179570.712000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [17179570.712000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185 [17179570.712000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [17179570.712000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193 [17179570.712000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [17179570.712000] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007) [17179570.712000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [17179570.712000] PCI: Enabling device 0000:09:06.0 (0000 -> 0003) [17179570.712000] ACPI: PCI Interrupt 0000:09:06.0[A] -> GSI 21 (level, low) -> IRQ 201 [17179570.712000] Simple Boot Flag at 0x36 set to 0x1 [17179570.712000] audit: initializing netlink socket (disabled) [17179570.712000] audit(1158578656.708:1): initialized [17179570.712000] highmem bounce pool size: 64 pages [17179570.712000] VFS: Disk quotas dquot_6.5.1 [17179570.712000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179570.712000] Initializing Cryptographic API [17179570.712000] io scheduler noop registered [17179570.712000] io scheduler anticipatory registered [17179570.712000] io scheduler deadline registered [17179570.712000] io scheduler cfq registered [17179578.712000] 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 [17179578.716000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179578.716000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [17179578.716000] assign_interrupt_mode Found MSI capability [17179578.716000] Allocate Port Service[pcie00] [17179578.716000] Allocate Port Service[pcie03] [17179578.716000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177 [17179578.716000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [17179578.716000] assign_interrupt_mode Found MSI capability [17179578.716000] Allocate Port Service[pcie00] [17179578.716000] Allocate Port Service[pcie02] [17179578.716000] Allocate Port Service[pcie03] [17179578.716000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 169 [17179578.716000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [17179578.716000] assign_interrupt_mode Found MSI capability [17179578.716000] Allocate Port Service[pcie00] [17179578.716000] Allocate Port Service[pcie02] [17179578.716000] Allocate Port Service[pcie03] [17179578.716000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185 [17179578.716000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [17179578.716000] assign_interrupt_mode Found MSI capability [17179578.716000] Allocate Port Service[pcie00] [17179578.716000] Allocate Port Service[pcie02] [17179578.716000] Allocate Port Service[pcie03] [17179578.716000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193 [17179578.716000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [17179578.716000] assign_interrupt_mode Found MSI capability [17179578.716000] Allocate Port Service[pcie00] [17179578.716000] Allocate Port Service[pcie02] [17179578.716000] Allocate Port Service[pcie03] [17179578.716000] isapnp: Scanning for PnP cards... [17179579.072000] isapnp: No Plug & Play device found [17179579.096000] Real Time Clock Driver v1.12 [17179579.096000] hpet_resources: 0xfed00000 is busy [17179579.096000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [17179579.100000] i8042.c: Detected active multiplexing controller, rev 1.1. [17179579.100000] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [17179579.100000] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [17179579.100000] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [17179579.100000] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [17179579.100000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179579.100000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [17179579.100000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [17179579.104000] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [17179579.104000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179579.104000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179579.104000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179579.108000] mice: PS/2 mouse device common for all mice [17179579.108000] EISA: Probing bus 0 at eisa.0 [17179579.108000] Cannot allocate resource for EISA slot 1 [17179579.108000] Cannot allocate resource for EISA slot 2 [17179579.108000] Cannot allocate resource for EISA slot 3 [17179579.108000] Cannot allocate resource for EISA slot 4 [17179579.108000] Cannot allocate resource for EISA slot 5 [17179579.108000] Cannot allocate resource for EISA slot 6 [17179579.108000] Cannot allocate resource for EISA slot 7 [17179579.108000] EISA: Detected 0 cards. [17179579.108000] NET: Registered protocol family 2 [17179579.160000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes) [17179579.164000] TCP established hash table entries: 262144 (order: 9, 3145728 bytes) [17179579.164000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [17179579.168000] TCP: Hash tables configured (established 262144 bind 65536) [17179579.168000] TCP reno registered [17179579.168000] TCP bic registered [17179579.168000] NET: Registered protocol family 1 [17179579.168000] NET: Registered protocol family 8 [17179579.168000] NET: Registered protocol family 20 [17179579.168000] Starting balanced_irq [17179579.168000] Using IPI No-Shortcut mode [17179579.168000] ACPI wakeup devices: [17179579.168000] LID HDEF PXS1 PXS2 PXS3 PXS4 USB1 USB2 USB3 USB4 USB7 SLT0 SLT1 SLT2 SLT3 SLT6 LANC MODM [17179579.168000] ACPI: (supports S0 S3 S4 S5) [17179579.168000] Freeing unused kernel memory: 332k freed [17179579.244000] vga16fb: initializing [17179579.244000] vga16fb: mapped to 0xc00a0000 [17179579.268000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179579.592000] Console: switching to colour frame buffer device 80x25 [17179579.592000] fb0: VGA16 VGA frame buffer device [17179580.624000] Capability LSM initialized [17179580.716000] ACPI: Fan [FAN0] (off) [17179580.732000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [17179580.732000] ACPI: Processor [CPU0] (supports 8 throttling states) [17179580.736000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [17179580.736000] ACPI: Processor [CPU1] (supports 8 throttling states) [17179580.736000] ACPI: Thermal Zone [TZ00] (50 C) [17179580.736000] ACPI: Thermal Zone [TZ01] (53 C) [17179581.460000] SCSI subsystem initialized [17179581.460000] ACPI: bus type scsi registered [17179581.460000] libata version 1.20 loaded. [17179581.464000] ata_piix 0000:00:1f.2: version 1.05 [17179581.464000] ata_pci_init_one: pci_dev class+intf: 0x10180 [17179581.464000] ata_pci_init_one: NO_LEGACY == 0 [17179581.464000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 193 [17179581.464000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [17179581.464000] ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14 [17179581.628000] ata1: dev 0 cfg 00:0040 49:2f00 82:746b 83:7d09 84:6063 85:7469 86:3d09 87:6063 88:203f 93:0000 [17179581.628000] ata1: dev 0 ATA-7, max UDMA/100, 234441648 sectors: LBA48 [17179581.628000] ata_acpi_push_id: skipping for PATA mode [17179581.636000] ata1: dev 1 cfg 00:0040 49:2f00 82:746b 83:7d09 84:6063 85:7469 86:3d09 87:6063 88:203f 93:0000 [17179581.636000] ata1: dev 1 ATA-7, max UDMA/100, 234441648 sectors: LBA48 [17179581.636000] ata_acpi_push_id: skipping for PATA mode [17179581.636000] ata1: dev 0 configured for UDMA/100 [17179581.636000] ata1: dev 1 configured for UDMA/100 [17179581.636000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2' [17179581.636000] pata_get_dev_handle: dev_handle: 0xdffe1f20, parent_handle: 0xdffe8cc0 [17179581.636000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff5d200, *handle=0xdffe1f20 [17179581.636000] do_drive_get_GTF: drive w/ adr=0: v: 0xdffdd3c0 [17179581.636000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2' [17179581.636000] pata_get_dev_handle: dev_handle: 0xdffe1f20, parent_handle: 0xdffe8cc0 [17179581.636000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff5d200, *handle=0xdffe1f20 [17179581.636000] do_drive_get_GTF: drive w/ adr=1: v: 0xdffdd360 [17179581.636000] scsi0 : ata_piix [17179581.636000] Vendor: ATA Model: TOSHIBA MK1234GS Rev: AH00 [17179581.636000] Type: Direct-Access ANSI SCSI revision: 05 [17179581.636000] Vendor: ATA Model: TOSHIBA MK1234GS Rev: AH00 [17179581.636000] Type: Direct-Access ANSI SCSI revision: 05 [17179581.636000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2' [17179581.636000] pata_get_dev_handle: dev_handle: 0xdffe1f20, parent_handle: 0xdffe8cc0 [17179581.636000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff5d200, *handle=0xdffe1f20 [17179581.636000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15 [17179581.980000] ata2: dev 1 cfg 00:85c0 49:0f00 82:4218 83:5000 84:4000 85:4218 86:1000 87:4000 88:0407 93:6d00 [17179581.980000] ata2: dev 1 ATAPI, max UDMA/33 [17179581.980000] ata_acpi_push_id: skipping for PATA mode [17179581.980000] ata2: dev 1 configured for UDMA/33 [17179581.980000] scsi1 : ata_piix [17179581.992000] Vendor: TOSHIBA Model: DVDW/HD TS-L802A Rev: AC03 [17179581.992000] Type: CD-ROM ANSI SCSI revision: 05 [17179581.992000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2' [17179581.992000] pata_get_dev_handle: dev_handle: 0xdffe1f20, parent_handle: 0xdffe8cc0 [17179581.992000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff5d200, *handle=0xdffe1f20 [17179582.008000] Driver 'sd' needs updating - please use bus_type methods [17179582.008000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) [17179582.008000] SCSI device sda: drive cache: write back [17179582.012000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) [17179582.012000] SCSI device sda: drive cache: write back [17179582.012000] sda: sda1 sda2 sda3 [17179582.424000] sd 0:0:0:0: Attached scsi disk sda [17179582.424000] SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB) [17179582.424000] SCSI device sdb: drive cache: write back [17179582.424000] SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB) [17179582.424000] SCSI device sdb: drive cache: write back [17179582.424000] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > [17179582.528000] sd 0:0:1:0: Attached scsi disk sdb [17179583.116000] usbcore: registered new driver usbfs [17179583.116000] usbcore: registered new driver hub [17179583.116000] USB Universal Host Controller Interface driver v2.3 [17179583.116000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 66 [17179583.116000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [17179583.116000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [17179583.116000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [17179583.116000] uhci_hcd 0000:00:1d.0: irq 66, io base 0x00001800 [17179583.116000] hub 1-0:1.0: USB hub found [17179583.116000] hub 1-0:1.0: 2 ports detected [17179583.180000] ieee1394: Initialized config rom entry `ip1394' [17179583.220000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193 [17179583.220000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [17179583.220000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [17179583.220000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [17179583.220000] uhci_hcd 0000:00:1d.1: irq 193, io base 0x00001820 [17179583.220000] hub 2-0:1.0: USB hub found [17179583.220000] hub 2-0:1.0: 2 ports detected [17179583.324000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 [17179583.324000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [17179583.324000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [17179583.324000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [17179583.324000] uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001840 [17179583.324000] hub 3-0:1.0: USB hub found [17179583.324000] hub 3-0:1.0: 2 ports detected [17179583.428000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169 [17179583.428000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [17179583.428000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [17179583.428000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [17179583.428000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001860 [17179583.428000] hub 4-0:1.0: USB hub found [17179583.428000] hub 4-0:1.0: 2 ports detected [17179583.532000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 66 [17179583.532000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [17179583.532000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [17179583.532000] ehci_hcd 0000:00:1d.7: debug port 1 [17179583.532000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [17179583.532000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [17179583.532000] ehci_hcd 0000:00:1d.7: irq 66, io mem 0xd2304000 [17179583.536000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17179583.536000] hub 5-0:1.0: USB hub found [17179583.536000] hub 5-0:1.0: 8 ports detected [17179583.564000] usb 2-1: new low speed USB device using uhci_hcd and address 2[17179583.640000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@xxxxxxxxxx> [17179583.640000] ACPI: PCI Interrupt 0000:09:06.1[B] -> GSI 20 (level, low) -> IRQ 74 [17179583.640000] PCI: Setting latency timer of device 0000:09:06.1 to 64 [17179583.688000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[74] MMIO=[d2005800-d2005fff] Max Packet=[2048] [17179583.716000] ide0: I/O resource 0x1F0-0x1F7 not free. [17179583.716000] ide0: ports already in use, skipping probe [17179583.716000] ide1: I/O resource 0x170-0x177 not free. [17179583.716000] ide1: ports already in use, skipping probe [17179583.792000] Attempting manual resume [17179583.816000] EXT3-fs: mounted filesystem with ordered data mode. [17179583.816000] kjournald starting. Commit interval 5 seconds [17179584.620000] usb 5-6: new high speed USB device using ehci_hcd and address 4 [17179584.960000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00a0d1a0d1a01578] [17179585.032000] usb 2-1: new low speed USB device using uhci_hcd and address 3[17179585.436000] usb 2-2: new full speed USB device using uhci_hcd and address 4 [17179592.916000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [17179592.916000] sd 0:0:1:0: Attached scsi generic sg1 type 0 [17179592.916000] 1:0:1:0: Attached scsi generic sg2 type 5 [17179593.088000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [17179593.088000] Uniform CD-ROM driver Revision: 3.20 [17179593.088000] sr 1:0:1:0: Attached scsi CD-ROM sr0 [17179594.840000] Linux agpgart interface v0.101 (c) Dave Jones [17179594.844000] agpgart: Detected an Intel 945GM Chipset. [17179594.860000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179594.864000] agpgart: AGP aperture is 256M @ 0x0 [17179594.876000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17179595.068000] hw_random: cannot enable RNG, aborting [17179595.088000] nvidia: module license 'NVIDIA' taints kernel. [17179595.092000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179595.092000] PCI: Setting latency timer of device 0000:01:00.0 to 64 [17179595.092000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8762 Mon May 15 13:06:38 PDT 2006 [17179595.220000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 82 [17179595.220000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [17179595.456000] Linux video capture interface: v1.00 [17179595.748000] saa7130/34: v4l2 driver version 0.2.14 loaded [17179595.860000] ACPI: PCI Interrupt 0000:09:06.0[A] -> GSI 21 (level, low) -> IRQ 201 [17179595.860000] Yenta: CardBus bridge found at 0000:09:06.0 [1025:006c] [17179595.860000] Yenta: Enabling burst memory read transactions [17179595.860000] Yenta: Using CSCINT to route CSC interrupts to PCI [17179595.860000] Yenta: Routing CardBus interrupts to PCI [17179595.860000] Yenta TI: socket 0000:09:06.0, mfunc 0x01a61b22, devctl 0x66 [17179595.860000] PCI: Enabling device 0000:09:04.0 (0000 -> 0002) [17179595.860000] ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179595.860000] saa7133[0]: found at 0000:09:04.0, rev: 209, irq: 169, latency: 0, mmio: 0xd2005000 [17179595.860000] PCI: Setting latency timer of device 0000:09:04.0 to 64 [17179595.860000] saa7133[0]: subsystem: 1461:a836, board: UNKNOWN/GENERIC [card=0,autodetected] [17179595.860000] saa7133[0]: board init: gpio is a400000 [17179595.992000] saa7133[0]: i2c eeprom 00: 61 14 36 a8 00 00 00 00 00 00 00 00 00 00 00 00 [17179595.992000] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [17179595.992000] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 c0 ff ff ff ff [17179595.992000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [17179595.992000] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff [17179595.992000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [17179595.992000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [17179595.992000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [17179595.992000] saa7133[0]: registered device video0 [v4l2] [17179595.992000] saa7133[0]: registered device vbi0 [17179596.076000] usbcore: registered new driver hiddev [17179596.092000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 201 [17179596.092000] Socket status: 30000006 [17179596.092000] Yenta: Raising subordinate bus# of parent bus (#09) from #09 to #0d [17179596.092000] pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff [17179596.092000] cs: IO port probe 0x7000-0x7fff: clean. [17179596.092000] pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff [17179596.092000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x89ffffff [17179596.096000] input: USB Optical Mouse as /class/input/input1 [17179596.096000] input: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1 [17179596.096000] usbcore: registered new driver usbhid [17179596.096000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [17179596.168000] sdhci: Secure Digital Host Controller Interface driver, 0.10 [17179596.168000] sdhci: Copyright(c) Pierre Ossman [17179596.168000] PCI: Enabling device 0000:09:06.3 (0000 -> 0002) [17179596.168000] ACPI: PCI Interrupt 0000:09:06.3[A] -> GSI 21 (level, low) -> IRQ 201 [17179596.168000] PCI: Setting latency timer of device 0000:09:06.3 to 64 [17179596.216000] sdhci: ============== REGISTER DUMP ============== [17179596.216000] sdhci: Sys addr: 0x00000000 | Version: 0x00008900 [17179596.216000] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [17179596.216000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [17179596.216000] sdhci: Present: 0x000a0000 | Host ctl: 0x00000000 [17179596.216000] sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [17179596.216000] sdhci: Walk up: 0x00000000 | Clock: 0x00000000 [17179596.216000] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [17179596.216000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf [17179596.216000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [17179596.216000] sdhci: Caps: 0x01e030b0 | Max curr: 0x00000000 [17179596.216000] sdhci: =========================================== [17179596.268000] mmc0: SDHCI at 0xd2006000 irq 201 DMA [17179596.280000] ieee80211_1_1_13_crypt: registered algorithm 'NULL' [17179596.284000] ieee80211_1_1_13: 802.11 data/management/control stack, 1.1.13[17179596.284000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx> [17179596.300000] ieee80211_crypt: registered algorithm 'NULL' [17179596.312000] ieee80211: 802.11 data/management/control stack, git-1.1.7 [17179596.312000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx> [17179596.416000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.0.5m [17179596.416000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [17179596.416000] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 19 (level, low) -> IRQ 193 [17179596.416000] PCI: Setting latency timer of device 0000:07:00.0 to 64 [17179596.420000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [17179596.504000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000 [17179596.540000] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [17179596.556000] saa7134_alsa: disagrees about version of symbol snd_ctl_add [17179596.556000] saa7134_alsa: Unknown symbol snd_ctl_add [17179596.556000] saa7134_alsa: disagrees about version of symbol snd_pcm_new [17179596.556000] saa7134_alsa: Unknown symbol snd_pcm_new [17179596.556000] saa7134_alsa: disagrees about version of symbol snd_card_register [17179596.556000] saa7134_alsa: Unknown symbol snd_card_register [17179596.556000] saa7134_alsa: disagrees about version of symbol snd_card_free [17179596.556000] saa7134_alsa: Unknown symbol snd_card_free [17179596.556000] saa7134_alsa: disagrees about version of symbol snd_pcm_stop [17179596.556000] saa7134_alsa: Unknown symbol snd_pcm_stop [17179596.556000] saa7134_alsa: disagrees about version of symbol snd_pcm_format_physical_width [17179596.556000] saa7134_alsa: Unknown symbol snd_pcm_format_physical_width [17179596.556000] saa7134_alsa: disagrees about version of symbol snd_ctl_new1 [17179596.556000] saa7134_alsa: Unknown symbol snd_ctl_new1 [17179596.556000] saa7134_alsa: disagrees about version of symbol snd_card_new [17179596.556000] saa7134_alsa: Unknown symbol snd_card_new [17179596.556000] saa7134_alsa: disagrees about version of symbol snd_pcm_lib_ioctl [17179596.556000] saa7134_alsa: Unknown symbol snd_pcm_lib_ioctl [17179596.556000] saa7134_alsa: disagrees about version of symbol snd_pcm_set_ops [17179596.556000] saa7134_alsa: Unknown symbol snd_pcm_set_ops [17179596.556000] saa7134_alsa: disagrees about version of symbol snd_pcm_format_signed [17179596.556000] saa7134_alsa: Unknown symbol snd_pcm_format_signed [17179596.556000] saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_integer [17179596.556000] saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_integer [17179596.556000] saa7134_alsa: disagrees about version of symbol snd_pcm_format_big_endian [17179596.556000] saa7134_alsa: Unknown symbol snd_pcm_format_big_endian [17179596.556000] saa7134_alsa: disagrees about version of symbol snd_pcm_period_elapsed [17179596.556000] saa7134_alsa: Unknown symbol snd_pcm_period_elapsed [17179596.556000] saa7134_alsa: disagrees about version of symbol snd_pcm_format_width [17179596.556000] saa7134_alsa: Unknown symbol snd_pcm_format_width [17179596.700000] parport: PnPBIOS parport detected. [17179596.700000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [17179596.752000] ts: Compaq touchscreen protocol output [17179597.012000] cs: IO port probe 0x100-0x3af: excluding 0x370-0x37f [17179597.016000] cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x407 0x4d0-0x4d7 [17179597.016000] cs: IO port probe 0x820-0x8ff: clean. [17179597.016000] cs: IO port probe 0xc00-0xcf7: clean. [17179597.020000] cs: IO port probe 0xa00-0xaff: clean. [17179597.636000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels) [17179597.832000] lp0: using parport0 (interrupt-driven). [17179597.928000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@xxxxxxxxxx> [17179597.928000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [17179597.928000] ieee1394: sbp2: Try serialize_io=0 for better performance [17179598.236000] Adding 1124508k swap on /dev/sdb5. Priority:-1 extents:1 across:1124508k [17179598.292000] EXT3 FS on sdb1, internal journal [17179598.548000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [17179598.548000] md: bitmap version 4.39 [17179599.044000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx [17179599.348000] NET: Registered protocol family 17 [17179599.716000] cdrom: open failed. [17179603.716000] NET: Registered protocol family 10 [17179603.716000] lo: Disabled Privacy Extensions [17179603.720000] IPv6 over IPv4 tunneling driver [17179614.588000] eth1: no IPv6 routers present [17179636.340000] kjournald starting. Commit interval 5 seconds [17179636.340000] EXT3 FS on sdb6, internal journal [17179636.340000] EXT3-fs: mounted filesystem with ordered data mode. [17179643.212000] ACPI: AC Adapter [ADP0] (on-line) [17179643.380000] ACPI: Battery Slot [BAT0] (battery present) [17179643.500000] ACPI: Power Button (FF) [PWRF] [17179643.500000] ACPI: Lid Switch [LID] [17179643.500000] ACPI: Power Button (CM) [PWRB] [17179643.500000] ACPI: Sleep Button (CM) [SLPB] [17179643.660000] ibm_acpi: ec object not found [17179643.700000] pcc_acpi: loading... [17179643.760000] wmi_add device=dff51400 [17179643.760000] calling WQBA [17179643.836000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)[17179649.356000] ppdev: user-space parallel port driver [17179649.784000] apm: BIOS not found. [17179655.484000] Bluetooth: Core ver 2.8 [17179655.484000] NET: Registered protocol family 31 [17179655.484000] Bluetooth: HCI device and connection manager initialized [17179655.484000] Bluetooth: HCI socket layer initialized [17179655.536000] Bluetooth: L2CAP ver 2.8 [17179655.536000] Bluetooth: L2CAP socket layer initialized [17179655.592000] Bluetooth: RFCOMM socket layer initialized [17179655.592000] Bluetooth: RFCOMM TTY layer initialized [17179655.592000] Bluetooth: RFCOMM ver 1.7 sylvain@sylvain-laptop:~$ Le jeudi 14 septembre 2006 à 20:58 +0200, Gunther Mayer a écrit : > Hi, > > can you send me a picture of your card and further info for inclusion to my > http://www.bttv-gallery.de ? > > 1st priority: > - picture of the card, the card backside (high resolution pics if feasible) > - dmesg when loading the driver > > further information: > - pictures of remote control and of original package (if feasible) > > Regards, Gunther _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
