Good day to Everyone. I have a problem with the TT S-1401 card. It seems, it cannot talk to diseqc switch correctly under Linux. I am sure the problem is local to Linux code, for i have it working in XP. I have the card connected to LNB0: Eutelsat-21.5E and LNB1:Hotbird. Scanning of LNB0: # scan -s 0 Eutelsat-21.5E is successful. When I try to scan Hotbird, i get # scan -s 1 Hotburd-13.0E scanning Hotburd-13.0E using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 12597000 V 27500000 3 >>> tune to: 12597:v:1:27500 WARNING: >>> tuning failed!!! >>> tune to: 12597:v:1:27500 (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. I am sure that the signal from HB is OK, because i tried to scan it while connected directly (w/o diseqc), and it was all right. I have Mercurial drivers 15d2ed3a6af2 installed. My dmesg: PCI: Enabling device 0000:00:0b.0 (0004 -> 0006) ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 169 saa7146: found saa7146 @ mem f8884000 (revision 1, irq 169) (0x13c2,0x1018). saa7146 (0): dma buffer size 192512 DVB: registering new adapter (TT-Budget-S-1401 PCI). adapter has MAC addr = XX:XX:XX:XX:XX:XX DVB: registering frontend 0 (Philips TDA10086 DVB-S)... lsmod on this subject: tda826x 3332 1 tda10086 8388 1 budget 11264 0 budget_core 10116 1 budget saa7146 16392 2 budget,budget_core ttpci_eeprom 2176 1 budget_core dvb_core 71400 2 budget,budget_core i2c_core 19536 13 lirc_i2c,eeprom,asb100, i2c_viapro,lnbp21,tda826x,tda10086, tuner,budget,budget_core,ttpci_eeprom, saa7134,ir_kbd_i2c Can somebody help? Appreciate any suggestions. Regards, Yuri. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
